Author: Site Editor Publish Time: 20-12-2022 Origin: Site
What are the factors that reducer oil temperature is too high?
Factor analysis:
a. Lubricating oil is unqualified or used for too long.At present, most of the lubricating oil used in our group's reducer is 320# extreme pressure gear oil. If you add expired or inconsistent oil with this type of lubricating oil and the lubricating oil has not been replaced for a long time, the oil temperature of the reducer may be too high;
b. Too much lubricating oil.When the height of the oil level is higher than the oil dipstick or the upper and lower limits of the visible hole, the oil temperature of the reducer will be too high;
c. Mechanical damage.Mechanical damage includes severe pitting of gears, broken teeth, damage to bearing cages, inner and outer rings, balls, and bearing lockup or severe shaft deformation;
d. The outside of the box is covered by sundries or dust.When things are piled up around the reducer or the surface of the body has not been cleaned for a long time, the heat dissipation of the reducer may not be completely covered by debris or dust, resulting in an increase in oil temperature;
e. The cooling equipment is blocked or fails.The cooling equipment, like the reducer, is placed in a dusty factory building. If the internal pipeline is not cleaned up for a long time to cause the cooling equipment to be blocked or the cooling equipment is broken, the oil temperature of the reducer will increase;
Cleaning method:
a. Replace lubricating oil;
b. remove the remaining oil;
c. Carefully check to find out the damaged parts of the parts and repair or replace the parts in time;
d. Remove sundries and dust;
e. Replace the cooling equipment or clean the blockage;
Is it good to add oil to the gearbox, zq reducer, 400 marine gearbox, reducer Changzhou, rv90 worm reducer
Which brand of gearbox is good, 650 type reducer parameters, Bosch gearbox, Qianjin Gearbox Co., Ltd., clearance adjustment of rv reducer
Gearbox Housing Casting Lead Time: Pour Weight, Pattern Slots, 2027 Windows
Gearbox Shaft Seal Selection: Lip, Labyrinth or Cassette for Wet Duty
What methods can be used to avoid failure of the internal gear transmission system of CJY reducer?
What impact will a gear transmission system failure have on the CJY reducer?
Gearbox Market 2027: Retrofit Demand in Southeast Asian Palm Oil Mills
If the gear gap of the reducer is too large or too small, what efficiency problems will it cause?
How to adjust and repair the gear backlash of the reducer if it is too large or too small?
How to carry out dynamic inspection after FAF98-4KW-140-M4 gear reducer is installed
How to deal with abnormal vibration of WPDKS80-60 worm gear reducer under low load
What are the maintenance points for ZDY250-3.55-II hard tooth surface reducer in food plants?
How to perform daily inspection of the sealing system of ZDY315-4.5-I hardened reducer?
What is the clearance standard of P series planetary reducer under different working conditions?
How to choose the P series planetary reducer suitable for your equipment
How to judge the degree of breakage of ZLYJ series reducer gears by listening to the sound
What are the common causes of failure of NGW102-6 planetary reducer bearing components?
What are the repair methods after the NGW81-25 planetary reducer bearing assembly fails?
How to judge whether there is a problem with the internal transmission pair of WP series reducer
What may be the causes of load fluctuations of WP series worm gear reducer?
Gearbox Breather Selection: Dust Caps, Desiccant Dryers and Pressure Balance
Gearbox Price Trends 2027: EU CBAM and the Steel Cost Pass-Through
Gearbox Oil Change Interval: Hours, Oil Tests and Top-Up Rules