WeiGao Transmission
Email: sales@wgt.net.cn
Language
通栏图2
tonglantu.jpg
Home / News / How to choose the P series planetary reducer suitable for your equipment

How to choose the P series planetary reducer suitable for your equipment

Author: Site Editor     Publish Time: 29-10-2026      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
How to choose the P series planetary reducer suitable for your equipment

1. The first step: clarify the boundaries of core working conditions

This is the basic premise of Selection, which directly determines the selection direction of all subsequent parameters:

1. Distinguish scene attributes: Precision positioning scenarios (servos, automated machine tools) give priority to return clearance and transmission efficiency; heavy-duty general scenarios (conveyors, mixers) focus on ensuring torque carrying and operating stability.

‌2. Determine the load characteristics‌: Stable loads (fans, ordinary conveyors) can be based on the standard parameters Selection; impact loads (crushers, high-frequency start-stop equipment) need to increase the torque safety factor to 1.5~2.0 to avoid long-term overload damage.

‌3. Confirm the installation conditions‌: If there is enough space, choose the horizontal model, which has balanced force and strong stability; if the space is small, choose the vertical model, and you need to check the axial load capacity to avoid excessive side load damage to the bearings.

2. Step 2: Accurate matching of core parameters

Parameters need to be checked in conjunction, and individual indicators cannot be looked at in isolation:

1. Calculation of reduction ratio: According to the formula i = motor rated speed ÷ equipment target output speed, the P series standard speed ratio (first-level 3-10, second-level 9-64, third-level 60-512) is preferred. The accessories are more versatile and the supply cycle is shorter.

‌2. Torque and power check‌: The rated output torque of the reducer must be ≥ 1.2 times the actual peak torque, and the heavy-load condition must support short-term 150%~200% overload; the rated input power must be ≥ the rated power of the motor to avoid "a small horse pulling a big cart".

‌3. Select accuracy as needed‌: For precision scenes, choose a high-precision model with a return clearance of 1-3arcmin, and the gear accuracy reaches ISO 5-6; for ordinary scenes, choose 3-8arcmin, without blindly pursuing minimal backlash and causing waste of costs.

‌4. Thermal power verification‌: When the ambient temperature is >40°C or when running at full load for 24 consecutive hours, a water cooling/air cooling system must be configured to control the oil temperature ≤80°C to avoid overheating failure.

3. Step 3: Adaptation of structure and details

‌1. Gear and bearing configuration‌: For heavy-load conditions, 20CrMnTi carburized and quenched hardened surface grinding gears are preferred, paired with heavy-duty roller bearings. The number of planetary gears is ≥ 4 to improve load uniformity.

‌2. Interface and protection adaptation‌: Check that the output shaft and flange dimensions completely match the equipment interface; for dusty and humid scenes, select IP65 or above protection level, equipped with double oil seal labyrinth seals.

‌3. Lubrication method selection‌: Forced lubrication (with oil pump) is used for low-speed and heavy-load conditions, splash lubrication is selected for medium- and high-speed conditions, and the oil line direction can be customized for special installation postures.

4. Final verification link

After completing the preliminary selection, two additional key verifications are required:

1. Peak torque check: Confirm that the reducer can withstand the impact load at the moment of starting and braking, and the short-term peak value does not exceed 2 times the rated torque.

2. Radial/axial load check: Ensure that the radial force and axial force acting on the output shaft of the equipment do not exceed the allowable values ​​marked on the sample to avoid output shaft deformation and early bearing damage.

Latest News

Random Products

WeiGao Transmission

Weigao Gear Reducer is an alliance group company that integrates research and development, production, sales, and service

+86 400 801 9158

Email: sales@wgt.net.cn;wgt.net.cn@gmail.com
Tel:+86571 85023000

WEIGAO REDUCER

FEEDBACK