Author: Site Editor Publish Time: 14-11-2026 Origin: Site
1. Damage to core transmission meshing components
Overload damage to the cycloidal wheel and pin tooth pair: The contact stress between the cycloid wheel and the pin tooth pair of this model is designed for forward load-bearing. When the load is reversed, the direction of the force changes suddenly. The contact stress on the meshing surface exceeds the design threshold. Early pitting and spalling occur quickly on the tooth surface. In severe cases, the cycloidal wheel directly breaks and the pin tooth sleeve is shattered and deformed.
Reverse impact failure of the swing arm bearing and the output bearing: The load-bearing direction of the bearing raceway and the lubricating oil film are suitable for forward operation. The alternating impact load during reverse rotation will cause the bearing clearance to increase abnormally, the needle roller will be broken, the raceway will peel off, and the bearing life will be directly shortened by 40% to 60%.
Shear wear of the output pin and pin sleeve: The pin and pin sleeve of the W output mechanism originally transmit torque smoothly in the forward direction. The instantaneous reverse shear force during reverse rotation will cause scratches on the surface of the pin, extrusion and deformation of the pin sleeve, and a significant decrease in transmission accuracy.
2. Failure of sealing and lubrication systems
One-way oil seal lip torn and leaking: The lip fitting direction of the skeleton oil seal at the output shaft end of this model matches the forward operation. When reversing with load, the lip cannot hold the shaft surface tightly, and will be torn by the reversely stirred high-pressure oil, causing continuous oil leakage, and the daily oil leakage can exceed 5ml.
Disordered splash lubrication path: BWY27 is a horizontal cycloid reducer. The oil pool stirring and splashing cycle of lubricating oil are fully adapted to forward steering. After reverse rotation, the upper bearing and meshing surface cannot obtain sufficient oil, resulting in semi-dry friction or even dry grinding. The local temperature rise quickly exceeds 85°C, and the lubricating oil oxidizes and deteriorates in a short period of time.
3. Destruction of the overall machine structure and operational stability
Output shaft bending deformation risk: The instantaneous reverse torque with load reversal can reach more than 2 times the rated value. The output bearing is subject to alternating radial impact, which will cause bending deformation under long-term effects, and the journal beat will exceed the standard, further aggravating the vibration and abnormal noise in subsequent operations.
Severe vibration and loosening of fasteners: During reverse rotation, the meshing gap does not match the force direction, and a strong metal impact sound will be generated during operation. The vibration amplitude is 50% higher than that of forward operation. After being transmitted to the machine base, it will cause the anchor bolts and shell joint surface bolts to loosen, and the installation accuracy will be destroyed.
Broken locking component of the model with backstop: If the reducer is equipped with a backstop, the instantaneous reverse impact torque of the load reversal will directly crush the wedges and rollers of the backstop, completely losing the anti-reversal function, and the risk of reversal will become further out of control under subsequent heavy load conditions.
4. Chain secondary damage at the load end
If the reducer is directly connected to heavy-duty equipment such as conveyors and elevators, reversing the load will directly drive the load to reverse, causing secondary failures such as material falling, chain derailment, and mixing paddle deformation. In severe cases, there may also be safety hazards such as heavy objects falling.
Offshore Wind Vessel Gearbox Market 2027: Crane and Winch Drive Demand
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?