Author: Site Editor Publish Time: 05-11-2026 Origin: Site
1. Direct deterioration in operational performance
Transmission accuracy failure: Tooth surface wear and tooth thickness reduction will cause the meshing clearance to exceed the standard, the return clearance to be out of control, and the torque and speed cannot be accurately transmitted.
Sudden drop in transmission efficiency: Tooth surface gluing and partial meshing will greatly increase friction resistance, and the transmission efficiency can drop from the rated 95% to less than 80%.
Abnormal noise and vibration: Pitting corrosion and broken teeth will cause periodic impact and abnormal noise. The vibration amplitude of the whole machine exceeds 0.15mm, and the anchor bolts are easy to loosen.
2. Chain damage to core components
Early scrapping of bearings: The additional radial force generated by unbalanced gear meshing will cause local wear of the bearing raceway and shorten the service life by 30% to 50%.
Shafting deformation and damage: The impact load generated instantly when a broken tooth becomes stuck can cause the journal to bend, the keyway to squeeze and deform, and even the shaft to break.
Risk of box cracking: Severe vibration and local stress concentration will cause cracks to appear in the bearing holes of the gray cast iron box, and the joint surface seal will completely fail.
3. Overall machine safety and secondary risks
Sudden stuck shutdown: Broken tooth fragments get stuck in the meshing pair, which will directly lock the transmission chain and interrupt the downstream production process.
Motor overload burnout: When the reducer is blocked, the motor current can reach 5~8 times the rated value, and the motor windings can be burned out in a short time.
Vicious cycle of lubrication system: Metal debris generated by gear wear is mixed into the lubricating oil, which will accelerate the abrasive wear of all moving pairs and form a closed loop of failure.
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?