Author: Site Editor Publish Time: 27-10-2026 Origin: Site
1. Lubrication failure
Insufficient lubricating oil/grease, oil aging, grease carbonization, improper viscosity or grade Selection will cause the oil film to become thinner or even ruptured, resulting in increased bearing temperature, raceway scratches, pitting, peeling, and in severe cases, jamming.
2. Overload and impact load
The actual load exceeds the rated load capacity of the bearing, or frequent starts and stops, forward and reverse rotation, gear meshing impact, and poor load sharing will cause high contact stress on the planetary bearing, resulting in local spalling, plastic deformation, and early fatigue.
3. Improper installation and assembly
Coaxiality deviation, insufficient accuracy of the bearing seat hole, too tight or too loose fit, improper adjustment of preload/clearance, and violent installation will cause the bearing to bear additional stress, resulting in raceway indentation, circling, and abnormal temperature rise.
4. Seal failure and contaminant intrusion
Aging of the sealing ring, lip wear, assembly damage or untimely maintenance can easily cause dust, moisture and metal shavings to enter the bearing cavity, causing three-body wear, corrosion and lubricating film damage.
5. Bearing fatigue
Under the action of long-term alternating stress, the rolling elements and raceways will suffer from pitting corrosion, pitting, and fish-scale peeling. Planetary bearings have compact space and high rotational speed. If cooling and lubrication are insufficient, the fatigue process will be significantly accelerated.
6. Material and manufacturing defects
The bearing ring material contains inclusions, segregation, insufficient hardness, or the machining dimensions of the bearing seat hole are out of tolerance, which may become the source of early failure.
7. Bearing chamber/bearing position wear
Long-term heavy load, improper fit tolerance or poor lubrication may cause the outer ring or inner ring of the bearing to rotate relative to each other, causing outer and inner rings to run away, further causing temperature rise, vibration and dimensional instability.
8. Electrical corrosion damage
If the reducer is matched with a variable frequency motor, the shaft current may break down the oil film and form regular pits or groove-like electrical corrosion marks on the raceway.
During on-site inspection, you can first check the lubrication status, then check the vibration, temperature rise and noise. After disassembly and inspection, focus on observing peeling, indentation, running circles, electrical corrosion and seal status, and combine the installation records and load conditions to determine the main cause.
Offshore Wind Vessel Gearbox Market 2027: Crane and Winch Drive Demand
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?