WeiGao Transmission
Email: sales@wgt.net.cn
Language
通栏图2
tonglantu.jpg
Home / News / What is the clearance standard of P series planetary reducer under different working conditions?

What is the clearance standard of P series planetary reducer under different working conditions?

Author: Site Editor     Publish Time: 29-10-2026      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
What is the clearance standard of P series planetary reducer under different working conditions?

1. Basic clearance standards for general accuracy levels

Under the common industry classification, the factory reference clearance of P series planetary reducers is divided in arc minutes:

‌PS level (super precision level)‌: Return clearance ≤ 1 arc minute, the highest precision level, achieved through high-precision gear grinding and rigorous parts selection.

‌P0 level (high precision level)‌: Return clearance 1-3 arc minutes, it is the mainstream choice for precision transmission, taking into account both accuracy and operational stability.

‌P1 level (industrial standard level)‌: The return gap is 3-5 arc minutes, achieving a balance between accuracy and cost, and is suitable for most general automation equipment.

‌P2 level (economical and practical level)‌: The return clearance is 5-8 arc minutes, the procurement cost is lower, and it only meets the basic power transmission needs.

The number of transmission stages will directly affect the clearance: the accuracy of a single-stage reducer can reach 1-3 arc minutes, the clearance of a two-stage reducer is usually 3-5 arc minutes due to the increase in the number of gear meshings, and the clearance of three stages and above will further increase to 5-8 arc minutes.

2. Adaptation clearance standards under different working conditions

‌High-precision positioning conditions‌ (precision machine tools, industrial robot joints, semiconductor equipment): Repeatable positioning accuracy is required to be ≤±0.01mm, PS level or P0 level must be selected, and the clearance should be ≤3 arc minutes to avoid obvious positioning errors during reverse motion.

‌General positioning conditions‌ (automated loading and unloading equipment, packaging machinery, ordinary conveyor lines): Repeatable positioning accuracy ≥±0.05mm, just choose P1 level, the clearance is 3-5 arc minutes, there is no need to excessively pursue high precision and cause cost waste.

‌Conditions without positioning requirements‌ (mixing equipment, fans, ordinary conveyor belts): only responsible for the power transmission function, select P2 level, clearance 5-8 arc minutes, focusing on ensuring load capacity and operational stability.

‌Heavy load impact working conditions‌ (mining machinery, lifting equipment, large machine tools): Gears and bearings are prone to elastic deformation, which increases clearance. Selection It is necessary to reserve redundancy on the basis of the target accuracy. If P1 level accuracy is required, give priority to models with a clearance close to 3 arc minutes to avoid deformation leading to excessive accuracy.

‌Extreme temperature conditions‌: In a high temperature environment of ≥40℃, the thermal expansion of the gear and the box will reduce the clearance. It is necessary to choose a model with a slightly larger initial clearance to prevent sticking; in a low temperature environment of ≤-10℃, the shrinkage of the components will increase the clearance. A model with a slightly smaller initial clearance needs to be selected to offset the impact of shrinkage.

‌High-frequency forward and reverse rotation conditions‌ (robot joints, CNC machine tool spindles): The requirements for clearance stability are extremely high. PS grade or P0 grade must be selected with a clearance of ≤3 arc minutes. At the same time, the gear meshing accuracy and bearing clearance control accuracy are ensured to avoid frequent starts and stops that cause the clearance to quickly exceed the standard after wear.

3. Clearance requirements under working conditions in typical subdivided industries

Taking the woodworking cutting machine as an example, the differences in working conditions of different shaft systems correspond to clear clearance red lines:

X/Y gantry feed axis (high-frequency forward and reverse interpolation cutting): The mainstream standard configuration has a clearance of ≤3 arc minutes, and high-end relief and fine carving scenes require ≤1-2 arc minutes. It is strictly prohibited to use products with a clearance of >5 arc minutes, otherwise problems such as plate size deviation and slotting misalignment will occur.

Z-axis lifting cutting axis (up and down reciprocating, impact load): The clearance allowed in ordinary cutting scenarios is ≤5 arc minutes, and the clearance in high-precision milling scenarios requires ≤3 arc minutes.

Rotating cutter axis/row drilling indexing axis: high-precision indexing scene clearance ≤1-2 arc minutes, simple single rotation axis can be relaxed to ≤3 arc minutes.

Latest News

WeiGao Transmission

Weigao Gear Reducer is an alliance group company that integrates research and development, production, sales, and service

+86 400 801 9158

Email: sales@wgt.net.cn;wgt.net.cn@gmail.com
Tel:+86571 85023000

WEIGAO REDUCER

FEEDBACK