Author: Site Editor Publish Time: 13-01-2023 Origin: Site
Planetary gear reducers, hard-tooth gear reducers, three-ring gear reducers and other products are most commonly used. Therefore, the lubrication work is also very important, and the selection of lubricating grease is also very important. Only by doing these work well can we ensure the efficient operation of gear reducers. In the process of operation, many customers have found another question: why does the lubricating grease of the reducer lose in use? Here's why:
1.Chemical reason: the base oil and thickener are oxidized due to the influence of heat and air at the friction and lubrication parts, resulting in the destruction of the soap structure of the reducer grease and softening loss in use.
2. Physical reason: due to the operation of the friction part, the lubricating grease is constantly affected by the shear stress, resulting in the destruction of the soap structure and the loss of software.
3. Causes of impurities: wear occurs in the moving body. These metal powders can accelerate the oxidation of the grease and produce organic acids, thus damaging the structure of the grease and causing the failure of the grease.
Because the lubricating grease will be lost in use, there is no fixed time and cycle for the loss, so we need to pay attention to the situation of the grease in the operation or maintenance inspection, and timely lubrication or cleaning, effectively delaying the depreciation of the reducer and protecting all parts.
reduce java,gear motor price,gearbox entertainment,automatic transmission gears,right angle gearbox,
Gearbox Shaft Seal Selection: Lip, Labyrinth or Cassette for Wet Duty
What methods can be used to avoid failure of the internal gear transmission system of CJY reducer?
What impact will a gear transmission system failure have on the CJY reducer?
Gearbox Market 2027: Retrofit Demand in Southeast Asian Palm Oil Mills
If the gear gap of the reducer is too large or too small, what efficiency problems will it cause?
How to adjust and repair the gear backlash of the reducer if it is too large or too small?
How to carry out dynamic inspection after FAF98-4KW-140-M4 gear reducer is installed
How to deal with abnormal vibration of WPDKS80-60 worm gear reducer under low load
What are the maintenance points for ZDY250-3.55-II hard tooth surface reducer in food plants?
How to perform daily inspection of the sealing system of ZDY315-4.5-I hardened reducer?
What is the clearance standard of P series planetary reducer under different working conditions?
How to choose the P series planetary reducer suitable for your equipment
How to judge the degree of breakage of ZLYJ series reducer gears by listening to the sound
What are the common causes of failure of NGW102-6 planetary reducer bearing components?
What are the repair methods after the NGW81-25 planetary reducer bearing assembly fails?
How to judge whether there is a problem with the internal transmission pair of WP series reducer
What may be the causes of load fluctuations of WP series worm gear reducer?
Gearbox Breather Selection: Dust Caps, Desiccant Dryers and Pressure Balance
Gearbox Price Trends 2027: EU CBAM and the Steel Cost Pass-Through
Gearbox Oil Change Interval: Hours, Oil Tests and Top-Up Rules