Author: WeiGao Transmission Publish Time: 30-08-2021 Origin: WeiGao Transmission
Each servo planetary gear box has a rated input speed and the number of planetary gears. As only one set of planetary gears cannot meet a large transmission ratio, then sometimes two or three sets of such gears are required to meet the requirements of the user. That is to say, the larger reduction ratio is, the more numbers of stages will be needed, and the lower the efficiency will be.
Well, how to check the backlash of TQG servo planetary reducer ?
Fix the output end and rotate the input end in the direction of clockwise and counterclockwise, which will generate rated torque about +-2% of torque, and there will be a slight angular displacement on the input end, which is called backlash. The unit is “minute”, which is one-sixtieth of a degree. It is also known as return clearance. The nominated input speed of the servo planetary gearbox can reach up to 18000 rpm (depending on the size of the gear box itself. The larger the reducer is, the smaller the rated input speed will be). The output torque of the industrial servo planetary gearbox is normally not more than 2000Nm, and the customized gearbox with super-torque can achieve the output torque more than 10000Nm. The working temperature range is generally from -25°C to 100°C. The operating temperature can be changed by changing the grease.
Therefore, the efficiency of the servo planetary gear box is related to the number of stages of the reducer.
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?
Fertilizer Plant Gearbox: Turnaround Season Demand and Sizing Guide
How to judge whether the WP series worm gear reducer is installed in place
How to clean the lubrication system of QJR-D450-20-IX gear reducer
What is the function of the breathable cap of the ZD80-5-2 soft tooth surface gear reducer?
Tissue Machine Yankee Drive Gearbox: Sizing High-Inertia Paper Drives