Author: WGT. Publish Time: 16-11-2021 Origin: WGT
1. XB controller pin gear planetary reducer has stable operation and low noise DB: During operation, there are many tooth pairs directly contacting the surface, high coincidence rate, stable operation, strong overload protection ability, low mechanical vibration and low noise Specifications and model noise of the model.
2. The cycloid reducer has a large transmission ratio and high efficiency: the transmission ratio of the primary gear is 9~87, the transmission ratio of the double gear is 121~5133, and the multi-stage combination reaches thousands.In addition, the pin-tooth meshing system has sleeve rolling friction, and the meshing surface layer has no relative sliding, so the movement efficiency of the primary deceleration reaches 94%.
3. The application is safe, reliable and durable: because the key parts are quenched (HRC58-62) and finely ground by high-carbon alloy steel, and the wired teeth are meshed with pin gear sleeves and transmitted to the pin teeth to form a rolling friction pair, friction The coefficient is small, so there is no relative sliding in the meshing area, and the wear is very small, so it is strong and durable.
4. Compact structure and light weight: Compared with other reducers with the same output power, the net weight volume is less than 1/3, because it is planetary gear transmission, and the input shaft and output shaft are on the same shaft to obtain the smallest possible Specifications.
Gearbox Shaft Seal Selection: Lip, Labyrinth or Cassette for Wet Duty
What methods can be used to avoid failure of the internal gear transmission system of CJY reducer?
What impact will a gear transmission system failure have on the CJY reducer?
Gearbox Market 2027: Retrofit Demand in Southeast Asian Palm Oil Mills
If the gear gap of the reducer is too large or too small, what efficiency problems will it cause?
How to adjust and repair the gear backlash of the reducer if it is too large or too small?
How to carry out dynamic inspection after FAF98-4KW-140-M4 gear reducer is installed
How to deal with abnormal vibration of WPDKS80-60 worm gear reducer under low load
What are the maintenance points for ZDY250-3.55-II hard tooth surface reducer in food plants?
How to perform daily inspection of the sealing system of ZDY315-4.5-I hardened reducer?
What is the clearance standard of P series planetary reducer under different working conditions?
How to choose the P series planetary reducer suitable for your equipment
How to judge the degree of breakage of ZLYJ series reducer gears by listening to the sound
What are the common causes of failure of NGW102-6 planetary reducer bearing components?
What are the repair methods after the NGW81-25 planetary reducer bearing assembly fails?
How to judge whether there is a problem with the internal transmission pair of WP series reducer
What may be the causes of load fluctuations of WP series worm gear reducer?
Gearbox Breather Selection: Dust Caps, Desiccant Dryers and Pressure Balance
Gearbox Price Trends 2027: EU CBAM and the Steel Cost Pass-Through
Gearbox Oil Change Interval: Hours, Oil Tests and Top-Up Rules