When using the gear reducer, we need to make some preparations. For these key points and preparation points in operation, let's talk to you. 1. Before the gear reducer device is used, the shaft assembly needs to be cleaned, and the collision, pollutants and how to clean the shaft assembly need to be inspected. 2. The operating temperature of gear reducer is about 0 to 40 degrees. 3. Check whether the matching size of the hole connected to the gear reducer device is appropriate, and the gap of the small hole is about H7. 4. When using the gear reducer, plug and replace the exhaust screw device when the position is better, so as to ensure the gas emission of the gear reducer device. Gear reducer assembly Whether the gear reducer is flat during assembly, pressure reduction, button structure, etc. Under random conditions, the outer wheel of the hammer, including coupling device, gear and other outputs, will not be damaged. Maintenance and application of gear reducer When maintaining and assembling the gear reducer, it is necessary to check whether its operation is dexterous and convenient. When using it, it is also necessary to test when it is empty, and slowly increase the bearing force during operation. The gear reducer shall not exceed the limited load application.
