Author: Weigao Transmission Publish Time: 14-10-2021 Origin: 威高传动
The lubrication of the reducer is a very important part of it.Whether it is a planetary reducer, a gear reducer or a worm gear reducer, it is inseparable from the lubrication of the maintenance reducer.The transmission of the cycloid reducer generally adopts regular lubrication, and the lubricant of the reducer can be lubricating oil or grease.Different reducers have different lubrication conditions, and different cycloid reducers are also different.
When the peripheral speed of the cycloid reducer is greater than 12m/s, oil injection lubrication should be used.When it is greater than or equal to 25m/s, the nozzle can be located on the meshing edge or exhalation edge of the gear teeth; when it exceeds 25 meters per second, the nozzle should be located on one side of the gear teeth, so as to cool in time and lubricate the gear teeth at the same time.Generally, the lubrication method of closed gear reducer is determined according to the peripheral speed of the gear.When the peripheral speed of the gear is less than 12 meters per second, the large gear is immersed in oil for lubrication.When the gear is working, it can evenly bring the lubricating oil to the tooth surface, and throw the oil to the box wall for heat dissipation.The depth to which the gear is immersed in the oil can be determined by the peripheral speed of the gear.Cylindrical gears are usually smaller than the tooth height, but generally should be greater than 10mm; bevel gears should be immersed in the full tooth width, at least half of the tooth width.
The amount of oil in the sump depends on the power transmitted by the gears.For single-stage transmission, 0.35-0.7lo oil is required for every kilowatt of power transmitted.For multi-stage transmissions, oil requirements are multiplied in stages.
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?
Fertilizer Plant Gearbox: Turnaround Season Demand and Sizing Guide
How to judge whether the WP series worm gear reducer is installed in place
How to clean the lubrication system of QJR-D450-20-IX gear reducer
What is the function of the breathable cap of the ZD80-5-2 soft tooth surface gear reducer?
Tissue Machine Yankee Drive Gearbox: Sizing High-Inertia Paper Drives