WeiGao Transmission
Email: sales@wgt.net.cn
Language
通栏图2
tonglantu.jpg
Home / News / Looking at reducer industry trends from the perspective of logistics sorting automation: conveying and sorting equipment needs and Selection key points - Hangzhou Weigao Transmission

Looking at reducer industry trends from the perspective of logistics sorting automation: conveying and sorting equipment needs and Selection key points - Hangzhou Weigao Transmission

Author: Site Editor     Publish Time: 19-10-2026      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

1. The high base growth of express delivery and sorting equipment is rewriting the demand structure of reducers.

Observing the trends of the reducer industry in the past two years , logistics sorting and warehousing automation are sources of increase that cannot be ignored. Data from the State Post Bureau shows that the national mailing and delivery volume is expected to reach 230 billion items in 2026, of which express delivery volume is about 214 billion items, a year-on-year increase of about 8%; more than 1,300 automated sorting centers across the country operate day and night, with more than 6,000 express delivery items sent out per second during peak periods. The per capita annual express delivery volume has increased from 59 items five years ago to 141 items, with the peak daily business volume reaching 777 million items.

The expansion on the equipment side is also obvious. Industry research predicts that China's smart sorting equipment market will be approximately 42 billion yuan in 2026, a year-on-year growth of 15%; the global logistics transportation and sorting system market is expected to exceed US$95 billion in 2026, of which the combined installed capacity of cross-belt sorters and slider sorters accounts for approximately 67%, and the compound annual growth rates of linear sorters and AGV sorting systems will reach 22.4% and 28.9% respectively. Almost every rotation, lifting and reversing action of these equipment requires a matching reducer behind it。

2. The typical working conditions of the sorting and conveyor line determine how to choose the reducer

Compared with general industrial scenarios, the requirements for speed reduction transmission of sorting and conveying equipment have obvious characteristics: all-weather intensive operation, high-frequency start and stop, many distribution points but low single machine power, and tight maintenance windows. The following table lists the correspondence between common equipment and reducers:

Device type

Commonly used reducers

Key points of working conditions

Cross belt/slider sorter host line

Hard tooth surface reducer, servo reducer

Frequent starts and stops at high speeds, pay attention to heat and backlash

Main belt conveyor line

Hard tooth surface reducer, shaft mounted reducer

Continuous full load operation, focusing on thermal power and bearing life

Spiral chute/vertical elevator

Worm gear reducer

Use the self-locking feature to prevent reversal, and pay attention to the temperature rise caused by low efficiency.

Swing distribution and steering mechanism

Cycloid pin wheel reducer

Large speed ratio, compact structure and good impact resistance

AGV/AMR drive unit

Planetary reducer, gear reduction motor

Limited space, low backlash and low noise required

It can be seen from this comparison that conveyor reducers are not a single category, but are matched separately according to start and stop frequency, installation space and load characteristics. For example, in the high-frequency jogging working condition of the sorting host, if a hard-tooth surface reducer is selected according to ordinary continuous working conditions , the low service coefficient will accelerate tooth surface fatigue; and when a worm gear reducer is selected for the spiral lifting link, the efficiency loss caused by self-locking must be included in the motor power.

3. Industry trends are transmitted to Selection and three changes in operation and maintenance

First, the number of starts and stops has increased dramatically, and the thermal calibration of gear reduction motors and reducers has changed from 'optional' to 'required'. The oil temperature easily crosses the warning line under intensive operation. It is recommended to convert the working condition coefficient based on the actual number of starts and stops per hour. If necessary, enlarge the No. 1 machine base or use forced lubrication.

Second, the amount of equipment is large and the area is wide, and the focus of operation and maintenance has shifted from 'fixing it if it breaks' to predictive maintenance. Industry data shows that with the popularization of intelligent diagnostic technology, the average failure rate of sorting equipment has dropped from 4.2% in 2020 to 1.7% in 2025. Corresponding to the reducer link, it is to regularly record the oil temperature, vibration and noise baseline, and deal with abnormal noise or abnormal temperature rise of the reducer as soon as possible to avoid line shutdown during peak periods.

Third, the localization rate of core components has increased (the localization rate of core components of intelligent sorting equipment has reached more than 75%), and purchasers' acceptance of domestic reducers has increased significantly. Delivery cycle and spare parts response have become more important considerations than price. This also explains why in the industrial reducer market in recent years , the share of regional manufacturers that respond quickly has continued to increase.

4. Three suggestions for equipment integrators and users

First, the three parameters of "start and stop frequency, daily running time, and ambient temperature" should be handed over to the manufacturer instead of just power and speed ratio, so as to get a plan with margin; second, it is recommended for batch projects to unify the reducer brand and oil to reduce spare parts and maintenance complexity; third, keep no-load and load current and temperature rise records during the acceptance of new lines as a baseline for future status comparisons.

Overall, the trend of the reducer industry is shifting from 'following the big industry' to 'following the segmented scenarios'. Logistics sorting automation is a typical example: continuous demand, harsh working conditions, and sensitive to response speed. Hangzhou Weigao Transmission covers a complete product line of cycloidal pinwheel reducers, hard tooth surface gear reducers, worm gear reducers and gear reduction motors. It supports free delivery and customization according to sorting and conveying working conditions. Equipment manufacturers and logistics integrators are welcome to provide working condition parameters and obtain solutions and quotations.

Latest News

WeiGao Transmission

Weigao Gear Reducer is an alliance group company that integrates research and development, production, sales, and service

+86 400 801 9158

Email: sales@wgt.net.cn;wgt.net.cn@gmail.com
Tel:+86571 85023000

WEIGAO REDUCER

FEEDBACK