Author: Site Editor Publish Time: 27-07-2016 Origin: Site
The project site is located in Palobo, Sulawesi Province, Indonesia.Our company is the contractor of this project.We officially signed the contract in Tianjin on July 26, 2016, and started designing and manufacturing.The project is expected to produce 120 tons per day.The output can reach 39,000 tons.The signing of the project marks a substantial step of our company in expanding overseas business.



The hard tooth surface reducer is a relatively accurate machine.It is used to reduce speed and increase torque.It is suitable for high-speed shaft speed not greater than 1500 rpm, gear transmission peripheral speed not greater than 20 m/sec, and working environment temperature of -40°C-45°C.
The gears of the hardened reducer are made of carburized and quenched high-strength low-carbon alloy steel.Tooth surfaces have high hardness.The gear adopts CNC grinding technology, which has high precision, good contact, high transmission efficiency, stable operation and low noise.;Small size, light weight, long service life, high bearing capacity; easy to disassemble and inspect, easy to install.
1. The center distance, center height and transmission ratio all adopt the priority number of the priority number system.
2. Gear parameters and structure are optimized by computer.
3. The gear is made of high-strength low-carbon alloy steel after carburizing and quenching.The hardness of the tooth surface is high, and the gear precision reaches the international standard level 6.
4. The transmission efficiency is high, the noise is low, and the carrying capacity has reached the world advanced level in the 1990s.
Gearbox Shaft Seal Selection: Lip, Labyrinth or Cassette for Wet Duty
What methods can be used to avoid failure of the internal gear transmission system of CJY reducer?
What impact will a gear transmission system failure have on the CJY reducer?
Gearbox Market 2027: Retrofit Demand in Southeast Asian Palm Oil Mills
If the gear gap of the reducer is too large or too small, what efficiency problems will it cause?
How to adjust and repair the gear backlash of the reducer if it is too large or too small?
How to carry out dynamic inspection after FAF98-4KW-140-M4 gear reducer is installed
How to deal with abnormal vibration of WPDKS80-60 worm gear reducer under low load
What are the maintenance points for ZDY250-3.55-II hard tooth surface reducer in food plants?
How to perform daily inspection of the sealing system of ZDY315-4.5-I hardened reducer?
What is the clearance standard of P series planetary reducer under different working conditions?
How to choose the P series planetary reducer suitable for your equipment
How to judge the degree of breakage of ZLYJ series reducer gears by listening to the sound
What are the common causes of failure of NGW102-6 planetary reducer bearing components?
What are the repair methods after the NGW81-25 planetary reducer bearing assembly fails?
How to judge whether there is a problem with the internal transmission pair of WP series reducer
What may be the causes of load fluctuations of WP series worm gear reducer?
Gearbox Breather Selection: Dust Caps, Desiccant Dryers and Pressure Balance
Gearbox Price Trends 2027: EU CBAM and the Steel Cost Pass-Through
Gearbox Oil Change Interval: Hours, Oil Tests and Top-Up Rules