Author: Weigao transmission Publish Time: 28-08-2021 Origin: 威高传动
The small geared motor is a widely used deceleration transmission equipment. The maintenance method of the small geared motor needs to be as follows:
1. Keep the gear reduction motor well lubricated, pay attention to filling or replacing the gear oil, and there is no dry friction.
2. First of all, in terms of external environment, tools, accessories, and workpieces (products) should be placed neatly, and pipes and lines should be organized.
Small geared motor.
3. Regularly clean all parts of the rotary gear reduction motor. If there are debris, sundries and stolen goods around the reduction motor, the staff should clean them up in time.
4. Next, in terms of rules and regulations, the staff who operate the gear reduction motor must abide by the operating procedures, do not use the gear reduction motor with overload, the mechanical protection devices are reliable and complete, and pay attention to timely eliminate unsafe factors.
5. Clean the motor reducer.Remove the dust and sludge on the outside of the motor reducer frame in time.If the use environment is dusty, clean it once a day.
6. Check and clean the wiring terminals of the motor reducer.Check whether the wiring screws of the junction box are loose or burnt.
7. Check the screws of each fixed part, including anchor screws, end cover screws, bearing cover screws, etc.Tighten any loose nuts.
8. Check the transmission device, check whether the pulley or coupling is cracked or damaged, and whether the installation is firm; whether the belt and its coupling buckle are intact.
9. For the starting equipment of the motor reducer, it is also necessary to clean the external dust and dirt in time, wipe the contacts, check whether there are burn marks on each wiring part, and whether the grounding wire is in good condition.
10. Inspection and maintenance of bearings.Bearings should be cleaned and replaced with grease or oil after a period of use.The time of cleaning and oil change should be determined according to the working conditions of the motor reducer, the working environment, the degree of cleanliness, and the type of lubricant;
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?
Fertilizer Plant Gearbox: Turnaround Season Demand and Sizing Guide
How to judge whether the WP series worm gear reducer is installed in place
How to clean the lubrication system of QJR-D450-20-IX gear reducer
What is the function of the breathable cap of the ZD80-5-2 soft tooth surface gear reducer?
Tissue Machine Yankee Drive Gearbox: Sizing High-Inertia Paper Drives
Wastewater Treatment Gearbox Market 2027: Policy Deadlines and Screw Pump Sizing
Vertical Turbine Pump Gear Drive Selection: Thrust Load, Support and Bearing Life