Author: China Weige Equipment Box Publish Time: 05-09-2021 Origin: 中国威格装备箱
During the long-term operation of the reducer gear equipment, some special conditions may cause early erosion of the equipment.What is the reason for the early pitting of the reduction machine gear during the use of the equipment, and how should we solve this situation?
1. The cause of early corrosion of the gear equipment of the reducer
1. Proper selection of selected gear material and service load matching is the cause of early corrosion.Secondly, the choice and matching of heat treatment hardness will also lead to early corrosion of its equipment.
2. The lubricating oil also has a great influence on the early pitting corrosion of the reduction gear.The unreasonable lubrication of the gear transmission and the improper selection of lubricants are also the reasons for the early corrosion of its equipment.
2. Methods to prevent early corrosion of reducer gear equipment
1. Reasonably lubricate the gear equipment of the reducer and choose a lubricant suitable for the equipment.
2. Improve the installation accuracy of the gear of the reducer to ensure the contact accuracy of the gear during the operation of the equipment.
For the gear of the reducer, problems in the installation and assembly process or failure according to the normal operation process will easily lead to various failure problems in the operation of the equipment.Therefore, in order to avoid possible problems with the use of the equipment, we must use the equipment according to the normal operation process, and we must also maintain the equipment during normal use to avoid its failure.
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?
Fertilizer Plant Gearbox: Turnaround Season Demand and Sizing Guide
How to judge whether the WP series worm gear reducer is installed in place
How to clean the lubrication system of QJR-D450-20-IX gear reducer
What is the function of the breathable cap of the ZD80-5-2 soft tooth surface gear reducer?
Tissue Machine Yankee Drive Gearbox: Sizing High-Inertia Paper Drives
Wastewater Treatment Gearbox Market 2027: Policy Deadlines and Screw Pump Sizing
Vertical Turbine Pump Gear Drive Selection: Thrust Load, Support and Bearing Life