Author: WGT. Publish Time: 30-11-2021 Origin: WGT
The weight of the planetary gear transmission is generally proportional to the weight of the gear, and the weight of the gear is closely related to its material and heat treatment hardness.For example, under the same power, the weight of carburized and quenched gears will be about 1/3 of that of quenched and quenched gears.Therefore, according to the structural characteristics of the planetary gear reducer and the load performance of the gears, hard gears should be widely used.There are many heat treatment methods to obtain hardened gears, such as surface quenching, overall quenching, carburizing and quenching, nitriding, etc., which should be selected according to the characteristics of the planetary gear reducer.
1. Surface quenching
There are two common surface hardening methods: induction hardening (for small size gears) and flame hardening (for large size gears).It works well when the case hardened layer of the hardened layer includes the bottom of the tooth root.Common materials for surface hardening have a carbon content of about 0.35%~0.5%, and the tooth surface hardness can reach 45~55Hrc.
2. Carburizing and quenching
Carburized and quenched gears have a relatively large load-bearing capacity, but a finishing process (gear grinding) must be used to eliminate heat treatment distortion to ensure accuracy.
Carburized and quenched gears are usually made of alloy steel, the carbon content before carburizing is 0.2%~0.3%, and the tooth surface hardness is usually in the range of 58~62Hrc.If it is lower than 57Hrc, the tooth surface strength is significantly reduced, and if it is higher than 62Hrc, brittleness increases.The hardness of the tooth center is usually 310~330hbw.The hardness of carburized and quenched gears should gradually decrease from the gear tooth surface to the deep layer, while the effective carburizing depth is specified as the depth from the surface to the deep layer, and the effective carburizing depth is specified as the depth from the surface to the deep layer with a hardness of 52.5HRC.
The effect of carburizing and quenching on the bending fatigue strength of gear teeth can not only increase the core hardness, but also the residual compressive stress located on the surface, which can reduce the stress in the large tensile stress region of the gear teeth.Therefore, the tooth root cannot be ground during tooth grinding, and the hob with the grinding allowance should be used during gear rolling.
3. Nitriding
Nitriding ensures high flank hardness with small deformations and improved bearing capability without the need for complete heat treatment.This has significant implications for internal gears where teeth are not easily ground.
4. Hardness combination of meshing gears
When both large and small gears have soft tooth surfaces, the tooth surface hardness of the small gear should be higher than that of the large gear.When both wheels have a hard tooth surface and high hardness, the hardness of the two wheels is the same.
The selection of a good planetary gear reducer material is conducive to improving the bearing capacity and service life of the gear reducer.
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?
Fertilizer Plant Gearbox: Turnaround Season Demand and Sizing Guide
How to judge whether the WP series worm gear reducer is installed in place
How to clean the lubrication system of QJR-D450-20-IX gear reducer
What is the function of the breathable cap of the ZD80-5-2 soft tooth surface gear reducer?