WeiGao Transmission
Email: sales@wgt.net.cn
Language
通栏图2
tonglantu.jpg
Home / News / Selection manual of DFY series hard tooth surface reducer

Selection manual of DFY series hard tooth surface reducer

Author: Site Editor     Publish Time: 19-10-2026      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
Selection manual of DFY series hard tooth surface reducer

1. Basic model and specification system

The DFY series is a four-stage hard tooth surface vertical shaft reducer, and the supporting hollow shaft output version is DFYK. The full series covers 14 standard center distance specifications:

DFY160, DFY180, DFY200, DFY225, DFY250, DFY280, DFY320, DFY360, DFY400, DFY450, DFY500, DFY560, DFY630, DFY710. The larger the center distance, the stronger the mechanical load-bearing capacity.

2. Core Selection parameter table

3. Model naming rules

Standard model format example: DFY 560 - 200 - III JB/T9002-1999

DFY: four-stage hard tooth surface conical cylindrical gear reducer

560: Final stage center distance (mm)

200: Nominal transmission ratio

III: The third assembly type

JB/T9002-1999: Implement national standard number

4. Selection Core verification steps

1‌. Mechanical torque priority‌: First calculate the actual output torque based on the equipment load, and multiply it by the usage coefficient of the corresponding working condition (1.5~2.0 for strong impact working conditions such as bucket lifts and scrapers) to ensure that the allowable mechanical torque of the sample is not exceeded.

2‌. A must-do thermal power check‌: DFY is a four-stage transmission with many gear pairs and high heat generation. Under 24-hour continuous operation, even if the mechanical torque reaches the standard, the thermal power must be checked. When the ambient temperature is high and ventilation is poor, it must be upgraded to forced circulation oil lubrication + cooler to avoid excessive oil temperature causing tooth surface gluing.

3. Supplementary check of shaft load: When the output shaft is connected with a sprocket and the drum cantilever, the allowable radial force and axial force must be checked to avoid shaft deflection causing eccentric wear of gear mesh; when equipped with a backstop, it is necessary to confirm that the axial thrust does not exceed the allowable load of the bearing.

‌4. Assembly and rotation confirmation‌: There are four assembly types: I/II/III/IV. The output shaft rotation can be clockwise (S), counterclockwise (N) or bidirectional (T), which must completely match the on-site installation space and equipment rotation.

5. Standard lubrication and cooling configuration

The default oil pool splash lubrication + natural cooling under normal working conditions makes maintenance simple;

With large center distance and 24-hour continuous heavy-load operation, forced circulation lubrication interfaces need to be reserved in the Selection stage to avoid later modifications.

6. Typical adaptation scenarios

It is specially designed for conveying and lifting equipment such as bucket elevators, low-speed scraper conveyors, large-angle long-distance belt conveyors, etc. It can also cover large-speed ratio and heavy-load general transmission mechanisms in metallurgy, mining, building materials, cement and other industries.

Latest News

WeiGao Transmission

Weigao Gear Reducer is an alliance group company that integrates research and development, production, sales, and service

+86 400 801 9158

Email: sales@wgt.net.cn;wgt.net.cn@gmail.com
Tel:+86571 85023000

WEIGAO REDUCER

FEEDBACK