How to install shaft mounted reduction motor. This paper mainly describes the installation relationship between the shaft mounted reduction motor and the working machine, the connection between the shaft mounted reduction motor and the working machine, and the installation of the counter torque support. The following is the Shanghai reducer to describe in detail how to install it. 1、 Installation relationship between shaft mounted reduction motor and working machine In order to avoid the deflection of the main shaft of the working machine and the additional force on the bearing of the reducer, the distance between the reducer and the working machine shall be as small as possible without affecting the normal operation, with a value of 5-10mm. 2、 Connection between shaft mounted reduction motor and working machine The reducer is directly sleeved on the main shaft of the working machine. When the reducer operates, the counter torque acting on the reducer box body is balanced by the counter torque support installed on the reducer box body or other methods. The machine is directly matched, and the other end is connected with the fixed support. 3、 Installation of counter torque support The counter moment support shall be installed on the side of the working machine facing the reducer to reduce the bending moment attached to the working machine shaft. The shaft sleeve at the connecting end of the counter torque support and the fixed support uses elastomers such as rubber to prevent deflection and absorb the torque fluctuation. Through the above description of installing the shaft mounted reducer motor, you should know about the shaft mounted reducer motor. If you need or want to know more, please consult our customer service personnel.
