Author: Weigao transmission Publish Time: 14-10-2021 Origin: 威高传动
The cycloidal pinwheel reducer has high processing precision, good quality, long service life and strong bearing capacity.Many manufacturers will choose cycloidal pinwheel reducers, so reducer manufacturers should pay attention to the following points when loading and unloading:
1. When installing couplings, pulleys, sprockets and other connecting parts on the output shaft of the cycloid reducer, direct hammering is not allowed.Since the output shaft structure of the reducer cannot bear the axial hammering force, the screw can be screwed into the connecting part through the screw hole at the shaft end.
2. The diameter of the output shaft and input shaft should comply with gb1568-79.
3. The eyebolts on the reducer are only used for lifting the reducer.
The packaging methods mainly include box packing (wooden box, plywood box, corrugated box, metal box, etc.), bare packaging and partial packaging.Partial packaging or colored bare packaging should be used for special transportation.
The shaft extension and key of the cycloid reducer should be evenly coated with anti-rust grease, packed in a packing box, tightly wrapped with plastic film, tied firmly and fixed in the box.Cycloidal pinwheel reducers should be packed in plastic bags, or vacuum packed if necessary.Cycloidal pinwheel reducers need to be placed in balance.Waterproof petroleum asphalt felt should be placed in the packing box to ensure that the box is dry.
When lifting, the lifting direction should be correct according to the schematic diagram of the packing box, and necessary protective measures should be taken to prevent the surface from being scratched or scratched by objects such as wire ropes.During transportation and storage, the cycloid reducer must not be placed directly on the concrete floor.It should be fixed during transportation to avoid impact and shaft deformation.
The reducer reminds you that the cycloid reducer must not come into contact with acid and alkali substances during hoisting.
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?
Fertilizer Plant Gearbox: Turnaround Season Demand and Sizing Guide
How to judge whether the WP series worm gear reducer is installed in place
How to clean the lubrication system of QJR-D450-20-IX gear reducer
What is the function of the breathable cap of the ZD80-5-2 soft tooth surface gear reducer?
Tissue Machine Yankee Drive Gearbox: Sizing High-Inertia Paper Drives
Wastewater Treatment Gearbox Market 2027: Policy Deadlines and Screw Pump Sizing
Vertical Turbine Pump Gear Drive Selection: Thrust Load, Support and Bearing Life
Gearbox Housing Casting Lead Time: Pour Weight, Pattern Slots, 2027 Windows
Gearbox Shaft Seal Selection: Lip, Labyrinth or Cassette for Wet Duty