Author: WeiGao Transmission Publish Time: 26-10-2021 Origin: WeiGao Transmission
As a necessary component of transmission products such as screw lifter, the stability of hard tooth reducer plays an important role in the whole transmission system. Do you know the transmission conditions and characteristics of hard tooth reducer? Come and have a look with Xiaobian.
1. The gear circumferential speed is not greater than 20m / S;
2. High speed is 1500r / shaft smaller than * * *;
3. The working environment temperature is 40 ℃ - 45 ℃
4. It can be both positive and negative operations.
Considering the working characteristics of crane mechanism and transmission range, the product performance is further improved, and fewer specifications are used to meet the requirements of users. Various characteristics:
1. High bearing capacity. Gears are carburized, Quenched and ground. The bearing capacity is higher than that of soft tooth surface and rigid face gear reducer, which greatly improves the quenching and tempering roll teeth.
2. Small volume and light weight. With the same bearing capacity as the gear reducer with soft tooth surface and hard tooth surface, the gear reducer can reduce 24 equivalent seat numbers.
3. High efficiency, low noise and low vibration. The gear grinding processing improves the accuracy grade. The comprehensive benefit of each grade is 0.98, and the vibration and noise are significantly reduced.
4. Adopt multi series, reduce the speed, pull a single-stage center distance, reduce the deceleration, and meet the high requirements of the crane mechanism; 400 nominal * * * large transmission gear reducer and meet the requirements of slow crane.
5.3 the fulcrum decelerates, but it is installed horizontally and longitudinally, or even at a deflection angle, which is convenient and fast.
6. The series of three-stage and four-stage combined mode gear reducer (i.e. three-stage assembly form and four-stage transmission ratio) provides a premise for slowing down the generalization of crane.
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?
Fertilizer Plant Gearbox: Turnaround Season Demand and Sizing Guide
How to judge whether the WP series worm gear reducer is installed in place
How to clean the lubrication system of QJR-D450-20-IX gear reducer
What is the function of the breathable cap of the ZD80-5-2 soft tooth surface gear reducer?
Tissue Machine Yankee Drive Gearbox: Sizing High-Inertia Paper Drives
Wastewater Treatment Gearbox Market 2027: Policy Deadlines and Screw Pump Sizing
Vertical Turbine Pump Gear Drive Selection: Thrust Load, Support and Bearing Life