Author: Wind Turbine Publish Time: 10-10-2021 Origin: 风力发电机组
1. What are the reasons and treatment methods for the noise generated by the worm gear reducer during use?
Answer: The reason for the noise when the worm gear reducer is running is that the multi-head worm of the fast planetary reducer is not evenly split.The reason for the noise at low speed is the quality of the bearing.
2. The causes and treatment methods of excessive temperature rise and jamming of the worm gear reducer?
Answer: Under the normal working condition of the reducer, the maximum high temperature shall not exceed 45°C.In case of high temperature, the machine should be stopped immediately for inspection.Generally, the reason for this problem is that the reducer of this tonnage is too small and overloaded, or the worm and the end cover of the worm gear are pressed too tightly, and the input speed cannot be ruled out.The worm gear reducer is lubricated with grease, and the high speed of the worm shaft* * * must not exceed 1000min/s.It can also get high and get stuck if the input speed is too high.The high temperature treatment method is to reduce the input speed, check whether the gland fitting is too tight, and whether the planetary reducer is short of oil.
3. What are the reasons for the vibration of the worm gear reducer during normal use and how to deal with it?
Answer: The vibration of the worm gear reducer after loading during use is due to uneven pitch of the screw, uneven splitting of the worm, unqualified quality of the plane pressure bearing and tapered bearing, too tight fit of the upper and lower sheaths of the screw, and non-concentricity, etc. caused.installation.
In order to reduce a series of problems during the use of the reducer, it is necessary to choose a good quality reducer when selecting a reducer.At the same time, we also need to choose a suitable reducer according to the specific requirements of the specific situation, so as to avoid a series of problems in the follow-up project progress from the source.
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?
Fertilizer Plant Gearbox: Turnaround Season Demand and Sizing Guide