The worm gear reducer must be kept in daily life, especially if the oil seal is damaged, it should be replaced in time according to the actual situation. During the actual maintenance of the worm gear reducer, we should look at the daily actual situation of the gear reducer.If the oil seal is damaged, we must replace the oil seal in time, and we should always check the entire oil position.If the amount of oil is not particularly sufficient, we must make up for it in time. When the worm gear reducer is actually used, the lubricating oil can be replaced after 7 to 15 days of operation.Later, it can be used every three to six months depending on the use of the relevant machine.It should be noted that the power supply must be cut off during the replacement process to ensure that everything is safe, and the oil level should be checked. If the original lubricating oil is found to be muddy, it must be replaced as soon as possible. When worm gear reducers of different qualities are actually used, basically their temperatures will be different.
