Reducer is applied in various fields of our life. It is generally used for transmission equipment with low speed and high torque. With the continuous development and growth of reducer industry, reducer is used in more and more industries. How long is the service life of reducer. During normal use, pay attention to the maintenance of the reducer, which is very important for prolonging the service life of the reducer. When the reducer is used for the first time, it needs to be replaced with new oil when it runs for 7-14 days. Regular inspection shall also be carried out during future use. If sundries are found in the oil, it must be replaced at any time, or the gearbox cleaning and maintenance machine can effectively help us reduce the impurities in the reducer and greatly reduce the replacement time of internal lubricating oil. For the reducer in long-term operation, the new oil should be replaced every 2-3 months. If the operation is less than 8 hours a day, it should be replaced every 4-6 months. The reducer is not short of oil. Under normal operation, it will not be damaged as long as it is maintained regularly. With the development of technology, the power of the reducer is becoming larger and larger, and the test cost is becoming higher and higher. A lot of reducers are directly put into use without even passing the test, so that various faults often occur in the actual use of the reducer, which brings some trouble to the maintenance and schedule guarantee, and causes huge economic loss. Considering these conditions, the performance test of reducer is of great significance. The appearance of accelerated life test of reducer solves these problems to a certain extent. The main method of accelerated life test of reducer is to statistically analyze the power change data of reducer and determine the corresponding load spectrum. Then the acceleration load spectrum is customized by using the strengthening coefficient*** Then the acceleration load spectrum is used to carry out relevant loading tests on the reducer, and it is obtained that the damage types and quantities of the actual reducer and the test reducer are in good agreement. Only by overhauling it regularly can the machine have a long service life and serve all walks of life longer.
