Author: WGT. Publish Time: 24-11-2021 Origin: WGT
The lubrication of the gear reducer is of great significance to prolong its service life. Lubrication can effectively improve the gear transmission efficiency and the working efficiency of metallurgical machinery and equipment.The following mainly introduces the relevant lubrication points of the mechanical reducer.
Selection lubricating oil is a must for mechanical reducers
1. Choose lubricating oil with proper quality
Gears need high load and cycle operation, so the selected lubricating oil must have strong oxidation resistance, durable, not easy to change, easy to precipitate water and dirt.The choice of cycle engine oil is usually suitable.Circulating oils that contain antioxidants and anti-rust agents have better oxidation resistance, durability, and anti-rust properties.Extreme pressure oils containing antiwear agents or extreme pressure additives should be selected.
2. Selection of lubricating oil or grease
Some machines can be lubricated freely without difficulty by using oil or grease.However, the most fuel efficient and economical economy should be chosen.
Generally speaking, the heat dissipation ability of lubricating oil is better than that of grease, the friction coefficient is small, the use and addition are simple, and the formed oil film is more uniform.For grease, it has the characteristics that lubricating oil does not have: it needs mechanical lubrication and cannot drip oil; if the retaining ring is perfect, the grease is not easy to leak, and it does not need to add oil for a long time; at higher temperatures, the grease It is not easy to be thin; the grease itself also has the function of protecting the bearing; the lubrication cycle must be extended for the part that is not easy to refuel; if the oil reservoir is good, the effect of preventing dirt from intruding is better.
3. Master oil viscosity
Viscosity is the most fundamental factor for perfect lubrication (ie the basis for the formation of an oil film on both friction surfaces).If the viscosity is too low, direct metal-to-metal friction tends to occur.If the viscosity is too high, the internal resistance of the oil will increase.None of them are suitable.Generally, choose a lower viscosity suitable for a specific machine, and the viscosity should not be too thick.Lubricated parts, journal speed, load and lubricated part clearance temperature also directly affect viscosity requirements.
4. Selection for lubrication mode
The method of lubrication also affects the choice of lubricant.For those oiling methods that use divergent oil supplies, oil bath oil supplies, circulating oil supplies, oil ring oil supplies, etc., the oil is not only used repeatedly in the lubrication system, but is also often dispersed into very small oil droplets and in contact with air , easy to oxidize, at least high-quality and durable oil, such as cycle engine oil, etc.It is best to contain antioxidants and antirust agents, which have good antioxidant and antirust properties.
5. Suitable for environmental conditions
The surrounding environment during machinery operation also directly affects the choice of lubricant.
temperature
The temperature around the machine directly affects the oil viscosity requirement.When the ambient temperature is high, an oil with a higher viscosity number should be selected; conversely, if the temperature is lower, an oil with a lower viscosity number can be used.For example, when the temperature of the vehicle is below 0°C, oil with a viscosity number of SAE 10W should be used, and when the temperature is above 32°C, oil with a number of SAE 50 should be used.Furthermore, when the oil is at a temperature below 57°C, oxidation is not significant; however, when the temperature exceeds 60°C, the rate of oxidation doubles every 10°C.Therefore, when the oil in the hydraulic system exceeds 60°C, the service life will be halved for every 10°C increase.The oxidation resistance of super cycle oil containing antioxidants is about 5 times or more than that of advanced cycle oil without additives.In order to reduce the temperature of the lubricating parts and the oil in the lubricating system, an oil cooler or radiator is usually installed to prolong the service life of the oil and maintain a certain viscosity of the oil.
Atmospheric conditions
If the humidity in the atmosphere is high and the machine is prone to rust, oil containing anti-rust additives should be used.As another example, oils with seawater anti-rust properties should be used when the salt in the air is high.
Selection of mechanical equipment gear reducer lubrication mode
closed equipment
The lubricating oil for the gear must be selected according to the type of gear, operating speed, reduction ratio, number of revolutions, load, and refueling method.Gear service conditions vary greatly, such as ambient temperature, humidity, atmospheric and other environmental conditions.Therefore, when selecting lubricating oil, these conditions must be considered together.Carried together, it is necessary to review these items.Also, although it is gear oil, it has various attitudes.The main representative specifications include JIS, API, AGMA, SAE, etc.If it is a classification of ordinary quality, it includes pure mineral oil or Pao gear oil, helical gear oil, extreme pressure EP gear oil and multi-purpose gear oil.These gear oils are subdivided according to viscosity.
open equipment
While lubricating oils can also be used on open gears, most lubricants with excellent oil adhesion and oil film strength are required to prevent oil from splashing or squeezing from tooth surfaces.As lubricating oils meet these requirements, compound oils mixed with animal and vegetable oils are often used, but due to their high viscosity, refueling methods are limited and inconvenient.As for the solvent diluent open gear oil has a volatile solvent, it can be used in any occasion by coating and spraying methods.Easy to apply and creates a strong film on tooth surfaces.This is very convenient.However, due to the use of volatile solvents, caution is necessary regarding its hazards and storage methods.Due to the adhesion of dust and moisture, there are many wear and tear or rust, so we should try our best to prevent dust and water.At the same time, we must also use lubricating oil with excellent rust resistance.
1) The dripping and refueling of lubricating oil is limited to small and light loads.For large and heavy loads, it is best to use open oil.You must be aware of the above when using solvent-diluted open gear oils.
2) When lubricating with grease, cement machinery, etc., because dust is particularly easy to adhere to the grease, it will become the cause of increased wear during long-term use.Therefore, the old grease and dust must be wiped off regularly and new grease applied.
3) The sliding of the helical gear (worm gear) is very large, because the oil between the worm and the wheel will be strongly squeezed, and it is difficult to completely maintain the oil film.Therefore, high-viscosity oils with a strong oil film and good lubricity must be used.
In terms of quality, helical gear oils even have EP gear oils with mineral oils and greases or oily drugs.In addition, if the worm is located in the superstructure, oil film consumption is prone to occur during the initial period, so special attention should be paid, especially when selecting helical gear lubricants under low temperature conditions, it is best to consult the lubricant manufacturer.When conical worm gears are used, the formation of an oily film must be particularly difficult, so lubricating oils with high viscosity and excellent lubricity must be used.
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?
Fertilizer Plant Gearbox: Turnaround Season Demand and Sizing Guide
How to judge whether the WP series worm gear reducer is installed in place