Author: WeiGao Transmission Publish Time: 28-09-2021 Origin: WeiGao Transmission
The worm gear reducer needs to be run in when it is used, and naturally there will be some problems for running in, which are roughly as follows.
1. The worm gear reducer wears quickly
Due to the processing and preparation of components and control elements of the new reducer device, the collaborative area is relatively small, and it is also relatively large for torque. In the operation process of worm gear reducer device, there are some problems in the nesting of components outside. The metal steps formed by friction are always used as friction materials, Then friction damage may occur outside some parts.
2. Penetration occurs
If the components of the worm gear reducer are loose and vibrate, the reducer will also be heated and restricted. The external sealing surface of the worm gear reducer and the connection between the pipe may be subject to leakage. Some built components are missing and are not easy to find during device commissioning. In the operation process, For the impact, the missing condition will be exposed. Therefore, it is normal for the worm gear reducer to have extravasation during running in.
3. Abnormal lubrication
When the worm gear reducer is lubricated, it may cause device problems due to the relatively small operation space of the components. It is not easy to have a symmetrical oil film on the outside to avoid friction damage.
The smoothness of the worm gear reducer leads to serious friction in front of the components, which will lead to external damage and problems.
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?
Fertilizer Plant Gearbox: Turnaround Season Demand and Sizing Guide
How to judge whether the WP series worm gear reducer is installed in place
How to clean the lubrication system of QJR-D450-20-IX gear reducer
What is the function of the breathable cap of the ZD80-5-2 soft tooth surface gear reducer?
Tissue Machine Yankee Drive Gearbox: Sizing High-Inertia Paper Drives
Wastewater Treatment Gearbox Market 2027: Policy Deadlines and Screw Pump Sizing
Vertical Turbine Pump Gear Drive Selection: Thrust Load, Support and Bearing Life