Author: Weigao transmission Publish Time: 12-10-2021 Origin: 威高传动
1. The reducer is overheated
1) Insufficient or excessive lubricating oil, oil and oil star exhaust caps are not loosened according to the product instruction manual
2) Cycloidal pinwheel reducer overcurrent protection or load overload, check the cause of the overload of the reducer motor, adjust to meet the requirements or replace the high-power reducer motor
3) Before starting up, confirm the installation direction and open the ventilation cover to exhaust and dissipate heat
4) Different installation methods have different lubricating oil stars.After confirmation, fill up the specified oil star to ensure the lubrication effect and heat dissipation effect
2. The abnormal noise of the geared motor
1) Spin noise.
2) Knocking sound and irregular meshing.
3) When there are impurities in the lubricating oil or the amount of oil is insufficient
Replace lubricating oil or refuel to specified value
3. When the motor rotates, the output shaft of the reducer does not rotate
The key connection of the reducer is damaged or the transmission gear is worn,
Disassemble the machine for repairs and replace parts.
4. Oil spill
1) Adjust the oil level and quantity of lubricating oil;
2) The vent cap is not installed correctly.
Confirm the position and direction of the breather cap to ensure that the breather cap is above or above the lubricating oil;
3) When the oil seal or gland leaks oil, the oil seal or gland is aged or installed incorrectly, replace the oil seal or gland;
4) Replace the gasket or O-ring when the gasket is damaged or aging.
The power supply voltage is too high, resulting in the oversaturation of the magnetic flux density of the iron core, resulting in an excessive temperature rise of the geared motor.Handling suggestion: If the power supply voltage seriously exceeds the standard, please contact the power supply department to solve it.
The power supply voltage is too low, and the temperature rise of the motor is too high under rated load.Handling suggestions: If the voltage drop of the power line is too large, replace the thicker power line; if the power supply voltage is too low, please contact the power supply department to increase the power supply voltage.
When the wire is removed, the iron core will be burned and the iron consumption will be increased.Suggestions for handling: check and test the iron core, repair the iron core, and troubleshoot.
The stator core and the rotor core rub against each other.Handling suggestion: Check the cause of the fault.If the bearing clearance exceeds the limit, replace the bearing.If the rotating shaft is bent, straighten it; when the iron core is loose or deformed, the iron core should be processed to eliminate the fault;
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?
Fertilizer Plant Gearbox: Turnaround Season Demand and Sizing Guide
How to judge whether the WP series worm gear reducer is installed in place
How to clean the lubrication system of QJR-D450-20-IX gear reducer
What is the function of the breathable cap of the ZD80-5-2 soft tooth surface gear reducer?
Tissue Machine Yankee Drive Gearbox: Sizing High-Inertia Paper Drives
Wastewater Treatment Gearbox Market 2027: Policy Deadlines and Screw Pump Sizing
Vertical Turbine Pump Gear Drive Selection: Thrust Load, Support and Bearing Life