Author: WGT Publish Time: 27-11-2021 Origin: WGT
Reduction motor refers to the combination of reducer and motor. This combination can also be called a gear motor or a gear motor. Basically, it is supplied in a complete set with the motor after integrated assembly by a professional reducer manufacturer. If there is smoke from the planetary reducer, you think that the smoke problem caused by the motor overheating caused by the high temperature of the machine at the first time. Of course, there is more than one factor leading to the smoke of the motor. There are several other reasons for the smoke of the planetary reducer:
1、 Reduction motor voltage too high or wiring error
If the voltage of the reduction motor is too high, it will lead to smoke. At this time, it is necessary to reduce the voltage appropriately, and then check whether there is a problem with the wiring. If it is found, it is necessary to correct the wiring immediately.
2、 Motor overload operation
During the operation of the gear reduction motor, the reducer is overheated and may even burn out the gear reduction motor. This phenomenon is generally the most common. There are generally two reasons. One is the overload operation of the gear reduction motor. In this case, the user should check the rated power and load of the reduction motor, and adjust the speed to the combined gear,
The second is the lack of lubricating oil, which only needs to be filled with lubricating oil on time.
3、 Frequent forward and reverse rotation of motor or excessive starting times
Properly reduce the forward and reverse operation or frequent starting times of the reduction motor, or use other types of motors to reduce the damage of the motor.
4、 Poor ventilation or exposure of motor
Check whether the fan of the motor is damaged or not fixed tightly. Pay attention to whether there are objects affecting ventilation and remove them in time to prevent smoke caused by temperature rise.
5、 The motor voltage is too low and the driven machine is stuck or poorly lubricated
If the voltage is too low and the power line is too thin, these factors may cause smoke problems. Replacing the power line can increase the voltage. If there is overload, you need to reduce the load. You can also use some cooling equipment to reduce the temperature and reduce the calorific value.
Offshore Wind Vessel Gearbox Market 2027: Crane and Winch Drive Demand
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?