Why is the reducer sealing system critical? Directly affects equipment accuracy and service life
During the operation of various precision automation equipment, many people will focus on core transmission accessories such as motors and gears, but often ignore the key value of the sealing system. In fact, most equipment suffers from common failures such as running lag, inaccurate accuracy, oil leakage, and premature aging of components. The root cause is the failure of the sealing structure of the reducer, not damage to the transmission body hardware. It can be said that the sealing system directly determines the operational stability, transmission accuracy and service life of the precision equipment, and is an important guarantee for the stable operation of high-end equipment.
The core function of the reducer sealing system is to isolate external dust, water vapor, and corrosive impurities, while firmly locking the internal lubricating grease to keep the transmission cavity clean and lubricated. Aiming at the harsh usage environment of high-end medical imaging high-pressure injection equipment such as CR, MR, and DSA, it is equipped with a proprietary high-strength sealing structure, which can effectively avoid problems such as gear wear, transmission gap deviation, and equipment jamming, ensuring long-term high-precision continuous operation of medical equipment. The stable oil lock seal design can effectively prevent lubricating oil leakage and oxidative deterioration. The stable operation life of the equipment can reach 10,000 hours, greatly reducing equipment operation and maintenance, repair and replacement costs.
High-quality sealing performance is the core foundation of precision transmission and the key to the precise operation of medical imaging equipment. The gear meshing gap of the planetary reduction machine is controlled within 0.1 arc minutes, and the contrast agent flow rate and dose error can be stably controlled within ±0.5%. It can withstand long-term operation under high-pressure conditions of 1,500 psi, and the torque output is stable throughout the process without fluctuations or lags. The operating noise of the equipment is as low as 55 decibels, which will not interfere with MRI medical imaging effects. The exclusive non-magnetic model can resist radio frequency interference, responds very quickly in 0.08 seconds, supports intelligent control and PLC integrated installation, and is fully adaptable to medical precision high-voltage operation scenarios.
