Author: WeiGao Transmission Publish Time: 23-09-2021 Origin: WeiGao Transmission
Why do planetary deceleration opportunities have broken axes. The first possible problem of large broken shaft is the quality problem of planetary reducer. Of course, this is what we can think of at ordinary times, and the main reason is the reason in the process of ordinary use. For example, how should we pay attention and what good methods are there in the process of using planetary reducer to accelerate and decelerate. Here are three reasons for Shanghai Jinchuan reducer.
1、 Some applications must strictly abide by this criterion, which is not only the protection of the reducer, but also to avoid the output shaft of the planetary reducer from being broken. This is mainly because if there is a problem with the installation of the equipment, the output shaft and its load of the reducer are stuck. At this time, the overload capacity of the drive motor will still increase its output. In turn, the force borne by the output shaft of the reducer may exceed twice its rated output torque and twist the output shaft of the reducer.
2、 In the process of acceleration and deceleration, if the instantaneous torque multiplied by the output shaft of the planetary reducer exceeds twice its rated output torque, and this acceleration and deceleration are too frequent, the reducer will eventually break the shaft. Considering that this situation occurs less, we will not introduce it further here.
3、 The wrong type selection results in insufficient output of the equipped reducer. Some users mistakenly believe that as long as the rated output torque of the selected planetary reducer meets the working requirements, in fact, it is not. First, the value obtained by multiplying the rated output torque of the equipped motor by the reduction ratio is, in principle, less than the rated output torque of the similar reducer provided by the product sample, Second, the overload capacity of the driving motor and the large working torque required in practice should be considered at the same time. Theoretically, the user needs large working torque. It must be less than twice the rated output torque of the reducer.
In the use of planetary reducer, we must pay attention to its code of conduct, and there are fatal reasons for insufficient output for wrong selection. The shaft breaking problem occurs when the output of the reducer is too small. The shaft breaking of the planetary reducer is a common problem. Except that the shaft of the reducer is broken due to poor assembly concentricity at the output end of the reducer. The above three points are the possible causes and problems.
Offshore Wind Vessel Gearbox Market 2027: Crane and Winch Drive Demand
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?