Author: Weihao Communication Publish Time: 30-08-2021 Origin: 威豪传播
Before discussing this issue, let us analyze the advantages and disadvantages between the helical gear and the helical gear of the planetary gear reducer.
Advantages of helical gear transmissions:
1. Small amount of teeth without weakening.
2. A large degree of coincidence reduces the load of each pair of gears and increases the load-bearing capacity of the gears.
3. Good meshing, stable transmission and low noise.
Disadvantages of helical gearboxes:
Compact structure.When cutting a helical cylindrical gear with a rack cutter, the number of small teeth of a standard gear without undercuts is smaller than that of a spur gear, so a more compact structure can be obtained.
2. There is a lot of coincidence.Under the same conditions, the meshing process of helical gears is longer than that of sinusoidal gears, that is, the degree of coincidence is larger, which reduces the load on each pair of gears.As a result, the bearing capacity of the gear is improved, the service life of the gear is extended, and the transmission is stable.
3. It is troublesome to manufacture the herringbone gear.The meshing performance is very good.The teeth of a helical cylindrical gear are meshed gradually.The force on the teeth also gradually increases from small to large and then from large to small, so the helical gears mesh more smoothly with less impact and noise.Suitable for high speed and high power transmission.
FECO Planetary Gear Reducer Manufacturer China.jpgktp Hollow Output Flange Planetary Gear Chuck Supplier China.jpg
Advantages of spur gearboxes:
1. Easy to install, think about how to install a helical gear in a complicated gear set!
2. Since the planetary gearbox group is mainly related to the transmission, not the force, and it does not need too much stability, the gears are enough.
3. Easy handling and low cost.
4. When the helical gear grid meshes, an axial force will be generated, which is unfavorable due to the multi-bearing function.
Offshore Wind Vessel Gearbox Market 2027: Crane and Winch Drive Demand
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?