Author: Site Editor Publish Time: 16-10-2026 Origin: Site
1. Installation and connection failures
Coupling misalignment: The axis deviation or angular deviation between the motor and the reducer exceeds 0.1mm, and the torque transmission is uneven, resulting in periodic power frequency vibration, and the axial amplitude will be significantly higher.
Loose anchor bolts: The position of the reducer deviates during operation, the transmission stability is destroyed, the vibration fluctuates significantly with the load, and the vibration value in the vertical direction is significantly larger.
Loose connecting parts: The coupling fastening screws and the input and output shaft locking sleeves are not locked, there is a gap impact in the transmission, and there will be obvious jitter the moment the machine is turned on.
2. Damage to internal transmission components
Bearing abnormality: Bearing raceway pitting, rolling elements damaged, radial clearance exceeding 15% of the original size, rotational friction resistance increases sharply, typical bearing characteristic frequencies will appear in the frequency spectrum, accompanied by abnormal noise.
Gear pair failure: The tooth surface is severely worn, the teeth are broken, the meshing backlash exceeds the standard, the transmission stability is destroyed, and periodic meshing shock is generated. The vibration frequency is directly related to the number of gear teeth.
Loose internal parts: axial movement occurs in gears, bearing seats and other components, collision and friction occur during operation, and the vibration will rapidly amplify over time.
3. Foundation and Rigidity Issues
The installation foundation is not firm: The rigidity of the base is insufficient, the pad iron layout is unreasonable, the whole unit shakes during operation, and even causes system resonance, and the amplitude remains high after starting up.
Insufficient frame rigidity: The mounting bracket of the KA series right-angle reducer is not rigid enough, elastic deformation occurs under load, and the vibration will be reversely amplified and transmitted to the box.
4. Abnormal load and working conditions
Load overload or large fluctuations: The actual load exceeds the rated value by more than 15%, or the load of the driven back-end equipment (such as mixing and conveying devices) suddenly changes, and the reducer is subjected to impact loads and causes jitter.
Dynamic balance failure: The input side coupling, pulley or motor rotor balance block falls off, and the remaining unbalance exceeds the standard, producing obvious power frequency horizontal vibration.
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?
Fertilizer Plant Gearbox: Turnaround Season Demand and Sizing Guide