Author: WeiGao Transmission Publish Time: 21-10-2021 Origin: WeiGao Transmission
Mechanical equipment makes people's work easier and faster. Now people have adapted to the mechanical age. Planetary reducer is essential in many equipment and provides very important functions. However, all kinds of faults will occur after the equipment has been used for a long time, and the planetary reducer is no exception. Among them, planetary deceleration will cause vibration, which needs to be solved as soon as possible, otherwise accidents may occur. What causes the vibration of general planetary reducer?
If there are reasons for excessive oscillation of planetary reducer, we will generally start from several aspects. Too large oscillation of base leads to problem attack, excessive wear of motor, and maybe disharmony of transmission mechanism and mechanical balance of rotor.
Excessive bearing wear: during long-term operation of the bearing, the clearance of the bearing is too large, or the imbalance may appear, resulting in bearing conflict and heating. It is worried that the conflict between the rotor and stator will directly damage the bearing. The sliding bearing is prone to oscillation. Due to the viscous effect of lubricating oil, the shaft will float, and this is also related to the bearing component. If the bearing component is larger, the wear will be faster.
Drive misadjustment: when the alignment line between the motor and the driver in the planetary reducer is not good, the oscillation frequency of the base can be said to be the speed of the planetary reducer. There may be a problem with the base planning, resulting in an unstable state in operation.
Rotor mechanical imbalance: the imbalance mentioned here refers to the imbalance under the condition of rotor stop and rolling. The rotor violates the axis and deflects and oscillates abnormally under the effect of centrifugal force.
Loose rotor parts: some parts of the motor rotor, commutator, magnetic pole, belt pulley, etc., and planetary reducer will also have these loose conditions after being used for a long time. Generally, there will be noise in the rotor under this condition. If these conditions occur, it is better to deal with them as soon as possible. The results will become more and more serious due to a long time.
When the planetary reducer vibrates, you might as well check it according to the above description, maybe you can find the cause faster and reduce the occurrence of faults.
Offshore Wind Vessel Gearbox Market 2027: Crane and Winch Drive Demand
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?