Author: WGT Publish Time: 16-11-2021 Origin: WGT
1. XB cycloid pin gear planetary reducer has stable operation and low noise DB: during operation, there are many tooth pairs on the direct contact surface, large coincidence degree, stable operation, strong overload protection ability, low mechanical vibration and noise, and low noise of models of specifications and models.
2. Cycloid reducer has large transmission ratio and high efficiency: the transmission ratio of primary gear is 9 ~ 87, the transmission ratio of double gear is 121 ~ 5133, and the multi-level combination reaches tens of thousands. Moreover, the needle tooth meshing system has sleeve rolling friction, and the meshing surface layer has no relative sliding, so the motion efficiency of primary deceleration reaches 94%.
3. The application is safe, reliable and durable: because the key parts are made of high carbon alloy steel quenched (HRC58-62) and finely ground, and the cycloid teeth are meshed with the needle gear sleeve and transmitted to the needle teeth to form a rolling friction pair, the friction coefficient is small, so that there is no relative sliding in the meshing area and the wear is very small, so it is firm and durable.
4. Compact structure and light weight: compared with other reducers with the same output power, the net weight volume is less than 1 / 3, because it is planetary gear transmission, and the input shaft and output shaft are on the same axis to obtain the smallest specification as possible.
Offshore Wind Vessel Gearbox Market 2027: Crane and Winch Drive Demand
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?