In daily use, due to improper operation or carelessness, the reducer circuit will be abnormal and burned.What aspects should we pay attention to.
1. The three-phase voltage is unstable.Voltage instability includes different three-phase voltages, three-phase power loss, and low voltage.
2. Repeated operation, repeated operation is the most harmful to the reducer.The current is very large when the reducer is switched on and off.Long-term repeated operation is the biggest cause of burnout of the reducer.
3. Long-term overload and incorrect power selection will cause the machine itself to heat up, and the reducer will burn out after a long time.
4. Water entering the motor is also very harmful.If the motor is energized after being flooded, an internal short circuit will occur and the reducer will be burned.
5. During the operation of the machine, if the transmission is blocked, the reducer will generate a lot of heat, which will burn the machine.
During the operation of the reducer, if there are long-term overloads, water ingress in the motor, etc., if you do not pay attention to the cleaning of the hips, it is easy to cause the reducer to burn out.This will not only cause financial loss, but also affect our work efficiency.Therefore, we must pay attention to the above points during use.
Offshore Wind Vessel Gearbox Market 2027: Crane and Winch Drive Demand
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?