Author: Wind Turbine Publish Time: 10-10-2021 Origin: 风力发电机组
1. The worm is a ring worm, and the number of teeth meshing with the worm wheel increases at the same time. The axial tooth profile of the worm is distributed in a circular arc, and the number of teeth in contact at the same time: 3-7 teeth.
2. The processing technology is completely consistent with the molding process, which can reliably guarantee the manufacturing accuracy and the theoretical state of meshing.The tooth surface of the worm is precision ground after quenching treatment.The tooth surface hardness and surface roughness grade can be improved to achieve higher tooth profile accuracy.The tooth surface of the worm is precision ground after quenching treatment.Tooth surface hardness: HRC≥50, roughness Ra≤0.8.
3. The contact area of the tooth surface is large, and there is instantaneous double-line contact.The total length of the contact line is lengthened, and the contact area of the tooth surface is greater than 70%.There are two contact lines on the tooth surface of the worm gear from both ends to the middle along the tooth width direction, and the angle between the contact line and the relative speed direction is close to 90 degrees.
4. The lubricating angle of the tooth surface is large, and it is easy to form dynamic pressure oil when meshing.The lubricating angle of the tooth surface is large, and the formation and maintenance of the dynamic pressure oil film are good.
5. The planar double-enveloping hourglass worm drive is an advanced heavy-duty transmission device.It has excellent characteristics such as large carrying capacity, high transmission efficiency and long service life.A good alternative to other worm drives.
Offshore Wind Vessel Gearbox Market 2027: Crane and Winch Drive Demand
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?