Author: Site Editor Publish Time: 28-09-2019 Origin: Site
Choosing high-quality planetary gear reducer materials will help improve its load-bearing capacity and service life.
Considering the structural characteristics of the Galaxy reducer and the load characteristics of the gears, hardened gears should be widely used.There are many heat treatments available to obtain hardened gears.Such as surface quenching, overall quenching, carburizing and quenching, nitriding, etc., should be selected according to the characteristics of the gear reducer.
1. Surface hardening
Common surface hardening methods include induction hardening (for small gears) and flame hardening (for large gears).It works well when the case hardened layer includes the bottom of the dedendum.The tooth surface hardness can reach 45-55HRC.
2. Nitriding
Nitriding can ensure that the gear can achieve high tooth surface hardness and wear resistance under the condition of small deformation.After heat treatment, good finishing cannot be done, which increases the load carrying capacity.
Three, carburizing and quenching
Carburized and quenched gears have a relatively large load-bearing capacity, but finishing (grinding) must be used to eliminate heat treatment deformation to ensure accuracy.
Carburized and hardened gears are usually used in alloy steels with a carbon content of 0.2%-0.3% before carburizing.The hardness of the tooth surface is usually in the range of 58-62HRC.If it is lower than 57HRC, the hard surface strength will be significantly reduced, and if it is higher than 62HR, the hard surface strength will become brittle.Increase.The hardness of carburized and quenched gears gradually decreases from the surface to the deep layer of the gear, and the effective carburizing depth is specified as the depth from the surface to the hardness of 5.25HRC.
The effect of carburizing and quenching on the bending fatigue strength of gears not only increases the hardness of the core, but also lies in the residual compressive stress on the surface.It reduces stress in areas of high compressive stress, so the root of the tooth cannot be ground during the grinding process.
Offshore Wind Vessel Gearbox Market 2027: Crane and Winch Drive Demand
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?