Author: Site Editor Publish Time: 15-10-2026 Origin: Site
TY series coaxial reducer is a type of hard tooth surface gear transmission with the input shaft and output shaft arranged on the same axis. It adopts a fully involute external meshing cylindrical gear structure and is widely used in metallurgy, mining, building materials, transportation, chemical industry, textile and other industries. Compared with models with parallel shaft arrangements, coaxial reducers occupy less space along the axis and have a compact structure after direct connection of the motors. They are especially suitable for production lines with limited installation locations and requiring alignment of the transmission chain. The following introduces the characteristics of the TY series coaxial reducer from the three perspectives of structure, performance and application.
The structural core of the TY series is "coaxial arrangement + hard tooth surface gear pair". The main components include:
Box body : One-piece cast of high-strength gray cast iron, with good rigidity and strong vibration resistance. It is not easy to deform during operation and maintains gear meshing accuracy for a long time;
Gear pair : The transmission parts are forged from high-quality alloy steel and processed by carburizing, quenching and gear grinding processes. The gear accuracy can reach GB/T 10095 standard level 6. It is a typical hard-tooth surface cylindrical gear reducer with high tooth surface contact strength and slow wear;
Shafting and bearings : The high-speed input shaft and the low-speed output shaft are located on the same axis. Heavy-duty rolling bearings are selected to withstand certain radial and cantilever loads;
Sealing components : Multiple sealing structures reduce the risk of oil leakage and ash ingress, and are suitable for on-site environments with large amounts of dust.
According to the marking rules of the reducer model meaning , the TY series model usually consists of 'model code - nominal center distance - nominal transmission ratio - equipped motor power'. For example, TY140-31.5-11 means that the center distance is 140mm, the transmission ratio is 31.5, and the equipped motor power is 11kW. When Selection, the key parameters can be read directly from the mark.
As a multi-stage helical gear reducer , the helical gear pair of the TY series has a large overlap and smooth meshing, so it has low noise and high reducer transmission efficiency , which can generally reach about 95%. General operating conditions are as follows:
project | Parameter range |
|---|---|
input speed | ≤1500 r/min (with Y series three-phase asynchronous motor, 4 poles) |
Gear peripheral speed | ≤20 m/s |
Motor installation form | B5 or B35 flange direct connection |
Reducer installation method | Horizontal installation, front and rear tilt angle ≤20° |
Running direction | Allows forward and reverse operation in both directions |
ambient temperature | -40℃~+45℃ (lower than 0℃, lubricating oil needs to be preheated, higher than 45℃, thermal power calibration is required) |
When Selection, the load-bearing capacity is limited by both mechanical power and thermal power: the optional working condition coefficient K=1.5 for uniform load, K=2 for medium impact load, and K=3 for strong impact load; when used in large quantities or in important occasions, the thermal power of the reducer should also be checked based on the ambient temperature coefficient and load rate coefficient , and cooling measures should be taken if necessary.
TY series coaxial reducers are commonly used in the following equipment due to their compact structure and high load capacity:
Conveyor reducer : belt conveyor, scraper conveyor and other continuous transportation equipment, coaxial arrangement facilitates direct alignment with the drum axis;
Elevator reducer : vertical lifting equipment such as bucket elevators can withstand a certain cantilever load;
Large-volume continuous transmission conditions in metallurgy, mining, and building materials industries;
Light industrial production lines with high requirements on noise and stability such as chemical industry, textile, food, etc.
During use, it is recommended to regularly check the oil level and quality, listen to the gear meshing sound, monitor the bearing temperature, and deal with any abnormalities in time, which can effectively extend the life of the equipment.
When selecting a coaxial reducer , it is recommended to confirm one by one in the order of 'motor power → transmission ratio → working condition coefficient → thermal power', taking into account the mechanical strength and temperature rise limit. Hangzhou Weigao Transmission provides multiple product lines such as cycloidal pinwheel reducers, hard tooth surface gear reducers, worm gear reducers, and gear reduction motors for various working conditions, and supports non-standard customization. If you are looking for a reliable reducer manufacturer or have Selection consulting needs for Hangzhou reducer manufacturers , please contact us to get a free Selection plan and quotation.
Offshore Wind Vessel Gearbox Market 2027: Crane and Winch Drive Demand
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?