Author: Weigao Transmission Publish Time: 11-10-2021 Origin: 威高传动
The weight of the planetary gear transmission is generally proportional to the weight of the gear, and the weight of the gear is closely related to its material and heat treatment hardness.Due to the special structure of the planetary gear reducer, hard gears are widely used in the market.Generally, hardened gears are obtained by surface quenching, overall quenching, carburizing and quenching, and nitriding.
1. Surface quenching
Generally speaking, there are two ways of surface quenching: high frequency quenching and flame quenching.High-frequency quenching is mainly used for small gears, and flame quenching is usually used for large gears
2. Carburizing and quenching
The carburizing and quenching bearing capacity is relatively large, but the machining process is relatively complicated.The finishing process must be used to eliminate heat treatment deformation to ensure the accuracy of the gear
3. Nitriding
The use of nitriding can ensure that the gear teeth can achieve high tooth surface hardness and wear resistance under the condition of small deformation.Finishing after heat treatment can no longer be carried out, which improves the bearing capacity.This has special significance for internal gears that are not easy to grind.
4. Hardness combination of meshing gears
When both large and small gears have soft tooth surfaces, the tooth surface hardness of the small gear should be higher than that of the large gear.When both wheels have hard tooth surfaces and high hardness, the hardness of the two wheels is the same.
Choosing a good planetary gear reducer material is conducive to improving the bearing capacity and service life of the gear reducer.
Offshore Wind Vessel Gearbox Market 2027: Crane and Winch Drive Demand
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?