Author: WeiGao Transmission Publish Time: 11-10-2021 Origin: WeiGao Transmission
The weight of planetary gear transmission device is generally proportional to the weight of gear, and the weight of gear is closely related to its material and heat treatment hardness. Due to the special structure of planetary gear reducer, hard gear is widely used in the market. Generally speaking, hardened gears are obtained by surface quenching, integral quenching, carburizing quenching and nitriding.
1. Surface quenching
Generally speaking, there are two ways of surface quenching, including high-frequency quenching and flame quenching. High frequency quenching is mainly used for small-size gears, and flame quenching is commonly used for large-size gears
2. Carburizing quenching
The bearing capacity of carburizing and quenching is relatively large, but the machining process is relatively complex. The finishing process must be used to eliminate the heat treatment deformation, so as to ensure the accuracy of the gear
3. Nitriding
The use of nitriding can ensure that the gear teeth can achieve high tooth surface hardness and wear resistance under the condition of small deformation. The finish machining after heat treatment can no longer be carried out, which improves the bearing capacity. This is of special significance for internal gears that are not easy to grind teeth.
4. Hardness combination of meshing gears
When both large and small gears have soft tooth surfaces, the tooth surface hardness of small gear shall be higher than that of large gear. When both wheels have hard tooth surfaces and high hardness, the hardness of the two wheels is the same.
The selection of good planetary gear reducer materials is conducive to improve the bearing capacity and service life of the gear reducer.
Offshore Wind Vessel Gearbox Market 2027: Crane and Winch Drive Demand
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?