Author: Site Editor Publish Time: 28-09-2019 Origin: Site
Weigao worm gear reducer is a kind of transmission machinery with compact structure, large transmission ratio and self-locking function under certain conditions.It is one of the commonly used reducing agents.Among them, Xinghe hollow shaft worm gear reducer not only has the above characteristics, but also is easy to install and has a reasonable structure, and has been more and more widely used.
Weigao hollow shaft worm gear reducer is equipped with a helical gear reducer at the input end of the worm gear reducer.The output speed of the multi-stage reducer is very low.It is a combination of helical and worm gear stages.Pure single-stage worm gear reducers are more efficient.In addition, it features low vibration, low noise and low energy consumption.
The performance and quality of the Weigao reducer are excellent, but in some cases there will be a failure of hot oil leakage.The specific reasons are as follows:
In order to improve efficiency, Weigao turbo reducers usually use non-ferrous metals as worm gears, while harder steel is used for worms.Because it is a sliding friction drive, it will generate higher heat during operation, which makes the parts of the reducer have thermal expansion differences between the seal and the seal, so that a gap is formed between the mating surfaces, and the oil becomes It becomes thinner due to increased temperature, which is likely to cause leaks.
There are four main reasons for the heat and oil leakage of the Weigao reducer.
1. Whether the combination of materials is reasonable.
2. The surface quality of the mating friction surfaces.
3. Choose lubricating oil and correct addition amount.
4. Assembly quality and use environment.
Of course, this is still rare, and the Galaxy reducer makers are trying to do a better job so that everything leaves the factory without any issues.If you encounter problems, our after-sales service will also actively solve them for you.
Offshore Wind Vessel Gearbox Market 2027: Crane and Winch Drive Demand
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?