Reducer equipment is one of the indispensable equipment in industrial production. When designing reducer, the manufacturer has designed different types of reducer equipment according to the use needs of different industries. Today, let's first understand the main requirements of ZQ reducer during assembly: 1. ZQ reducer parts can be installed after cleaning. 2. In the order of assembly, we can operate in the reverse order of disassembly. 3. During assembly, the surface of rolling or sliding parts shall be coated with lubricating oil to form preliminary lubrication conditions. 4. When installing the cycloid wheel, install it according to the position of the prefix when removing it. 5. When the output shaft is installed into the base, it is allowed to hit the concave part with a red copper rod, but not with a hammer. 6. When the output shaft pin is inserted into the corresponding hole of the cycloid gear, pay attention to the position of the spacer ring, and fix the position with the pin sleeve to prevent crushing the spacer ring. 7. For the oil resistant rubber sealing ring, we should pay attention to adjusting the tightness of the spring and apply grease. 8. The bearing of input shaft of ZQ reducer can be installed by heating method. 9. The sealing paper on the joint surface shall be renewed. 10. After the ZQ reducer is assembled, the high-speed input shaft can be rotated by hand. It should rotate flexibly without friction jamming. I hope you can understand the assembly points of ZQ reducer equipment. If you encounter any problems in the process of using the equipment, you can consult us.
