Author: Weigao transmission Publish Time: 22-09-2021 Origin: 威高传动
Working principle of worm gear reducer:
The worm gear reducer is a power transmission mechanism that uses a speed converter of gears to reduce the number of revolutions of the electric motor (electric motor) to the required number of revolutions and obtain a larger torque.
The basic structure of the worm gear reducer is mainly composed of transmission parts, worm gears, shafts, bearings, boxes and accessories.It can be divided into three basic structural parts: box body, worm gear, bearing and shaft combination.The case is the basis of all accessories in the worm gear reducer.It is an important accessory to support and fix the shafting parts, ensure the correct relative position of the transmission parts, and support the load acting on the reducer.
The worm gear is mainly used to transmit motion and power between two interlaced shafts, and the bearings and shafts are mainly used to transmit power, run and improve efficiency.
Therefore, worm gear reducers are generally used for low-speed and high-torque transmission equipment.The electric motor, internal combustion engine or other high-speed running power meshes with the large gear on the output shaft through the gear with a small number of teeth on the input shaft of the reducer.Ordinary reducers also have several pairs of gears with the same principle to achieve the ideal reduction effect.The ratio of the number of teeth of the large and small gears is the transmission ratio.
Offshore Wind Vessel Gearbox Market 2027: Crane and Winch Drive Demand
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?