How to install a shaft mounted geared motor.This article mainly introduces the installation relationship between the shaft-mounted deceleration motor and the working machine, the connection between the shaft-mounted deceleration motor and the working machine, and the installation of the anti-torque bracket.The following is the Shanghai reducer to introduce its installation method in detail. 1. The installation relationship between the shaft-mounted geared motor and the working machine In order to avoid the deflection of the main shaft of the working machine and the additional force on the bearing of the reducer, the distance between the reducer and the working machine should be as small as possible without affecting the normal operation, and the value is 5-10mm. 2. The connection between the shaft-mounted deceleration motor and the working machine The reducer is directly set on the main shaft of the working machine.When the reducer is running, the reaction torque acting on the reducer case is balanced by the reaction torque bracket installed on the reducer case or other methods.The machine is directly matched, and the other end is connected with the fixed bracket. 3. Installation of anti-torque bracket The anti-moment bracket should be installed on the side of the working machine facing the reducer to reduce the bending moment attached to the shaft of the working machine.The shaft sleeve at the connection end of the anti-torque support and the fixed support is made of elastic body such as rubber to prevent deflection and absorb torque fluctuations. Through the above instructions for installing shaft-mounted geared motors, you should have an understanding of shaft-mounted geared motors.If you need or want to know more, please consult our customer service staff.
