The worm gear reducer must be maintained in daily life, especially if the oil seal is damaged, it should be replaced in time according to the actual situation. During the actual maintenance of the worm gear reducer, we should look at the daily actual situation of the gear reducer. If the oil seal is damaged, we must replace the oil seal in time, and we should often check the position of the whole oil. If the oil quantity is not particularly sufficient, we must make up in time. When the worm gear reducer is actually used, the lubricating oil can be replaced after 7 to 15 days of operation. Later, it can be replaced every three to six months according to the use of the relevant machine. It should be noted that the power supply must be cut off during the replacement process to ensure that all are safe, and the oil position should be checked, If the original lubricating oil is found to be muddy, it must be replaced as soon as possible. When worm gear reducers of different quality are actually used, basically their temperature will be different.
