WeiGao Transmission
Email: sales@wgt.net.cn
Language
通栏图2
tonglantu.jpg
Home / News / How to look at reducer models: BLD, NMRV, R/S/K/F naming rules and model comparison - Hangzhou Weigao Transmission

How to look at reducer models: BLD, NMRV, R/S/K/F naming rules and model comparison - Hangzhou Weigao Transmission

Author: Site Editor     Publish Time: 15-10-2026      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

When purchasing or repairing a reducer, the string of letters and numbers on the nameplate often makes people confused. In fact, the reducer model is not randomly arranged. It compresses the transmission form, installation method, frame number, reduction ratio and equipped motor power into a dozen characters. By understanding the meaning of the reducer model , you can determine in a few minutes whether a piece of equipment is suitable for the current working conditions, and you can also avoid making the wrong purchase when purchasing replacement or spare parts. This article explains the reading method according to three common types of cycloidal pinwheels, hardened gears and worm gears.

1. General structure of reducer models

Although the code names of each manufacturer are different, most models follow the same set of logic, which can be broken down into five sections:

Location

meaning

Example

① Series code

Transmission form: cycloidal pinwheel, helical gear, worm gear, etc.

B, X, R, K, NMRV

② Structure/installation code

Horizontal or vertical installation, foot or flange, solid shaft or hollow shaft

W foot plate type horizontal installation, L flange type vertical installation

③ Base number

Determine the allowable torque and Dimensions, the larger the number, the higher the load.

The "4" in BLD4

④ Transmission ratio

The ratio of input speed to output speed, that is, the speed ratio of the reducer

43 means i=43

⑤ Motor parameters

Equipped with motor power, number of poles, or indicate whether it is directly connected

7.5kW, 4 pole

Cut the nameplate into these five sections, and the remaining work is to check the parameters one by one.

2. Cycloidal pinwheel reducer models: B series and X series

Domestic cycloidal pinwheel reducers mostly use two sets of code names: B series (heavy load, high torque) and X series (light load, compact). The letter combination represents the structure and connection method:

  • BW / XW : foot plate horizontal type, biaxial type;

  • BL/XL: Flange vertical mounting, biaxial type;

  • BWD / XWD: Horizontal installation, direct connection with ordinary motors, belonging to the common BLD reducer model family;

  • BLD / XLD: vertical installation, direct connection of ordinary motors;

  • BWED / BLED: Add "E" to the original code name, indicating double-stage deceleration.

Take BLED53-17-4 as an example: B is the cycloidal pinwheel series, L is the flange vertical installation, E is the double-stage, 53 is the frame number (the first one is the low-speed stage, the second one is the high-speed stage), 17 is the transmission ratio, and 4 means equipped with a 4kW motor. The base numbers of single-stage models are usually 0~9 and 12~65, and the common speed ratios are 7~87; the speed ratios of double-stage models can be extended from 121 to 7569. When comparing cycloidal pinwheel reducer models, you need to check the frame number and transmission ratio at the same time. It is easy to select the wrong load capacity by only checking the first one.

3. Hard tooth surface gear reducer models: R, S, K, F series comparison

Imported brands and most domestic manufacturers use the writing method of "letter series plus frame number" on hard-tooth surface reducers. The meaning of the model can be understood as follows:

series letters

Transmission form

Output direction

Common base numbers

R/RF

Helical gear reducer (coaxial)

coaxial with input

17~167

F/FA/FH

Parallel axis helical gear

Parallel, flat arrangement

27~157

K/KA

Bevel gear plus helical gear

90° right angle

37~187

S/SA

Helical gear plus worm gear

90° right angle

37~97

The suffixes are also regular: F means flange mounting, A means hollow shaft, H means shrink disk connection, and no suffix means solid shaft. For example, R37-10.0-B3 represents the coaxial helical gear reducer of base 37, transmission ratio 10, and foot installation. After mastering this relationship, you can directly quote the series and specification numbers for hard-tooth surface reducer replacement inquiries, reducing back-and-forth confirmations.

4. How to read the NMRV worm gear reducer model

The NMRV worm gear reducer adopts the writing method of 'NMRV-center distance-speed ratio'. For example, NMRV050-30-90B5: 050 means a base with a center distance of 50mm, 30 is the speed ratio, 90 is the motor base number, and B5 is the flange installation form. The speed ratio of worm gear reducer is usually single-stage between 7.5 and 100. When it is greater than 100, a double-stage combination is required. The output shaft is sensitive to radial load, so it is not suitable to directly install a sprocket or pulley on the shaft end to withstand large bending moments.

5. From model to Selection: three parameters that must be reviewed

Finding the model number is only the starting point. What really determines long-term stable operation is the following three reviews:

  • Output torque: Calculated according to T=9550×P×η/n₂ (P is the motor power, η is the transmission efficiency, n₂ is the output speed), and then multiplied by the working condition coefficient - average load takes about 1.5, medium impact takes 2.0, strong impact or frequent starts and stops continue to amplify;

  • Reducer speed ratio calculation : i=n₁/n₂, four-pole motor n₁ is about 1450 r/min, reverse the speed ratio according to the required output speed, select the standard speed ratio, and then back-calculate the actual output speed;

  • Thermal power and load direction: Thermal power calibration is required when the ambient temperature is higher than 40°C or long-term continuous operation; the radial and cantilever loads of the output shaft must fall within the allowable range. The front-end connection of flange-mounted models can often only take half of the values ​​in the table.

6. After reading the model number: consultation with Selection

After reading the reducer model clearly, replacement and spare parts procurement will be much smoother, but matching the model does not mean matching the working conditions. If the nameplate is unclear or non-standard customization is required, it is recommended to provide the motor power, output speed, installation method and working system at the same time, and have the manufacturer complete the load verification. Hangzhou Weigao Transmission provides multiple product lines such as cycloidal pinwheel reducers, hard tooth surface gear reducers, worm gear reducers, gear reduction motors, etc., which can be customized according to drawings. As a local reducer manufacturer in Hangzhou , we provide free reducer consultation and quotation for customers and end-users from all over the world who are looking for Hangzhou reducer manufacturers . Welcome to contact us to obtain the model comparison table and technical parameters.

Latest News

WeiGao Transmission

Weigao Gear Reducer is an alliance group company that integrates research and development, production, sales, and service

+86 400 801 9158

Email: sales@wgt.net.cn;wgt.net.cn@gmail.com
Tel:+86571 85023000

WEIGAO REDUCER

FEEDBACK