Author: Site Editor Publish Time: 22-10-2026 Origin: Site
In equipment such as mixing tanks, conveyor lines, and packaging machines that require vertical direct connection of the motor, the BLD cycloidal pinwheel reducer is a model with a high appearance rate: vertical flange installation, direct motor connection, and a single-stage speed ratio of 1:87. In addition, it has strong overload capacity and compact structure. It is widely used in metallurgy, mining, chemical industry, food, textile and other industries. However, when purchasing, many users only focus on the price. It is not uncommon to find that the model label cannot be understood, the base number and power do not match, and the output speed does not meet the standard after selecting the speed ratio. This guide to the cycloidal pinwheel reducer Selection explains the BLD series model reading, frame number matching, speed ratio calculation and common misunderstandings at once.
Domestic cycloidal pinwheel reducers are divided into two sets of codes: B series (heavy load and large torque) and X series (light and small power). BLD belongs to the vertical direct-coupled type of B series. The model number consists of six segments of characters. Take the BLD reducer model BLD4-43-7.5 as an example to disassemble it segment by segment:
Field | meaning | The value in this example |
|---|---|---|
B | B series cycloid reducer (heavy-duty type; X series is light and small) | B series |
L | Vertical flange installation (W is horizontal foot) | Vertical |
D | Ordinary motor direct connection (without D, it is a double-axis type and requires a separate motor) | Direct-coupled motor |
4 | Frame number, the larger the number, the greater the torque and size. | Base No. 4 |
43 | Reduction ratio i=43 | The input turns 43 times and the output turns 1 turn. |
7.5 | Equipped with motor rated power 7.5kW | 7.5kW |
There is another letter E in the code name, which means double-stage deceleration, such as BLED53-17-4: B series vertical double-stage direct connection, No. 53 base (the first digit is the low-speed stage, the last digit is the high-speed stage), speed ratio 17, equipped with 4kW motor. When reading the model number, please note that the No. 4 machine base is also marked. There may be differences in the output torque and shaft diameter of different manufacturers. When purchasing replacements, check with the sample parameters, not just the literal model number.
The frame number determines the allowable torque, Dimensions and configurable power range. The common specifications of the BLD vertical series range from BLD1 to BLD18, and then upwards to large bases such as BLD120 to BLD450; the power of the whole machine covers about 0.37~55kW, and the output torque is 150~20000N·m. The power adaptation range of common machine base segments is as follows (subject to the manufacturer’s sample):
base section | Common adaptation power | Typical applications |
|---|---|---|
BLD0~BLD1 | 0.18~1.1kW | Small packaging machine, feeding and conveying |
BLD2~BLD3 | 0.55~4kW | Small mixing and food conveying line |
BLD4~BLD5 | 2.2~11kW | Vertical mixing tank, belt conveyor |
BLD6~BLD8 | 2.2~18.5kW | Sewage treatment, building materials mixing |
BLD9~BLD12 | 5.5~45kW | Mining transportation and metallurgical auxiliary equipment |
BLD13 and above | 30~55kW | Large crushing, heavy lifting |
The principle of selecting the machine base number is: determine the allowable torque of the machine base based on the value obtained by multiplying the load torque by the service factor, rather than selecting the machine base based on the motor power. When the power is the same but the speed ratio is different, the allowable output torque of the machine base is the same gear. When the load is heavy, it is better to increase the frame size by one gear.
BLD series cycloidal pinwheel reducer speed ratio has 11 standard gears: 9, 11, 17, 23, 29, 35, 43, 47, 59, 71, 87. The single-stage speed ratio range is 9~87; if the speed ratio exceeds 87, it must be changed to double-stage, the double-stage range is 121~5133, and multi-stage combination can be higher. The output speed is calculated as n₂=n₁/i, taking the 4-pole motor n₁=1450r/min as an example:
Speed ratio i | Output speed (r/min) | Typical occasions |
|---|---|---|
9 | About 161 | Fast transportation and packaging |
17 | about 85 | Universal conveyor line |
29 | about 50 | Belt conveyor |
43 | about 34 | Mixing tank, feeder |
59 | about 25 | Stir slowly, lift |
87 | about 17 | Low speed feeding and lifting |
The speed selection ratio is first deduced from the output speed required by the equipment i=n₁/n₂, and then moved to the nearest standard gear; when the gear deviates too far, it is better to adjust the peripheral transmission ratios such as pulleys and sprockets, rather than allowing the output speed to deviate significantly from the design value for a long time, otherwise the process rhythm and heat dissipation will be affected.
The calculation formula for the output torque of the reducer is T=9550×P×η/n₂, where η is the transmission efficiency of the cycloidal pinwheel reducer : single-stage 90%~94%, double-stage about 81%~85%. Taking the BLD5-43-7.5 driven vertical mixing tank as an example: P=7.5kW, n₁=1450r/min, i=43, then n₂≈33.7r/min; taking η=0.92, the output torque T=9550×7.5×0.92÷33.7≈1950N·m. Then take the service coefficient 1.3~1.5 according to the mixing working conditions. If the load torque falls within the allowable range, you can confirm the machine base; if it exceeds, first enlarge the machine base number or increase the power, and then check the thermal power and starting torque. For the complete reducer Selection calculation, it is recommended to go through the four items of torque, speed ratio, thermal power, and starting frequency.
One is frequent starts and stops. Starting and stopping more than 60 times per hour will accelerate the fatigue of the pin tooth sleeve and the arm bearing. SelectionIn this case, the service factor must be increased, or a machine base with a larger impact resistance margin must be selected. The second is axial load. When the axial force on the output shaft exceeds 200kg (both the self-weight of the vertical mixing blade and the axial flow force are taken into account), an additional thrust bearing must be installed, and the output shaft of the reducer cannot bear all the burden. The third is vertical anti-reverse. In situations where the output shaft is installed vertically and the load may cause the output shaft to reverse and slide (lifting, screw feeding), a model with an anti-reverse device should be selected. The fourth is low temperature working conditions. If the ambient temperature is lower than -10°C, low-temperature grease must be used, otherwise the starting resistance will be large and the lubrication will fail. The fifth is efficiency value. The efficiency of the two-stage model is significantly lower than that of the single-stage model. When calculating torque, 94% cannot always be taken. It is more reliable to take the two-stage model as 81%~85%. In addition, it is recommended to check whether the box material is HT250 gray cast iron. The heavy-duty machine base is preferably a double-row tapered roller bearing output structure, which has better wear resistance and load-bearing capacity.
To sum up, the BLD cycloidal pinwheel reducer Selection follows five steps: list the working conditions (load type, duration, start and stop frequency, ambient temperature) → calculate the load torque and multiply it by the service factor → fixed speed ratio and output speed → allowable torque for the frame size → check the installation form, anti-reverse and low temperature details. Each step has a quantitative basis, so the model can be selected accurately.
If you need a parameter checklist based on your working conditions, please contact Hangzhou Weigao Transmission . As a reducer manufacturer, we provide a complete product line such as BLD/X series cycloidal pinwheel reducers, hard tooth surface gear reducers, worm gear reducers, etc., and support reducer customization and reducer quotations . If you need technical support from Hangzhou reducer manufacturers , reducer consultation or replacement model parameter verification, you can contact engineers to obtain a free solution.
Offshore Wind Vessel Gearbox Market 2027: Crane and Winch Drive Demand
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?