Author: WGT. Publish Time: 19-11-2021 Origin: WGT
China's industry is remembered by the world, and China's gear industry is the leader of the world's gear industry.The development goal of China's gear industry is determined as 'promoting China's gear manufacturing power and export power'.
In the process of progress, China's gear industry will reveal four major situations: The market will reveal a large number of new equipment products with international standards and independent intellectual property rights.It can be widely used in metallurgy, mining, chemical industry, building materials, hoisting, transportation, textile, paper, instrument, plastic, rubber, construction machinery, energy and other industrial sectors.
The high-speed shaft rotation of the hardened cylindrical gear reducer should not be greater than 1500rpm.The peripheral speed of the gear transmission should not be greater than 20m/s.The operating environment temperature is -40-45°C.If it is lower than 0°C, the lubricating oil should be preheated above 0°C to 0°C before starting.Reducers are available for operation in both positive and negative directions.
The lubricating oil should be replaced after the first use or the new replacement of the new replacement worm pair and 150-400 hours later, and the subsequent oil change cycle should be less than or equal to 4000 hours.Regularly check the quantity and quality of the oil, keep enough lubricating oil, and replace the oil mixed with impurities or deteriorate in time.The filling volume of oil should meet the requirements in the table.Do not mix oils of different brands.Mixing of oils of the same brand but different viscosities is allowed.Please refer to Attached Figure 1 for the oil level.The operating environment temperature of the reducer is - 40 ~ + 40 ℃, according to the attached picture 2. When the ambient temperature is lower than 0 ℃, the lubricating oil must be heated above 0 ℃, or the lubricating oil with low freezing point must be used before starting.
Offshore Wind Vessel Gearbox Market 2027: Crane and Winch Drive Demand
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?