Author: China weigao Gearbox Publish Time: 28-08-2021 Origin: China weigao Gearbox
1. Heat and oil leakage
In order to improve efficiency, worm gear reducers generally use non-ferrous metals as worm wheels, and worms use harder steel. Because it is a sliding friction drive, more heat will be generated during operation, which will cause differences in thermal expansion between the parts and seals of the reducer, thereby forming gaps on each mating surface, and the lubricating oil will become thinner due to the increase in temperature, which is easy to cause leakage . There are four main reasons for this situation. One is the unreasonable combination of materials; the second is the poor quality of the meshing friction surface; the third is the incorrect selection of the amount of lubricant; the fourth is the poor assembly quality and use environment.
2. Worm gear wear
The worm wheel is generally made of tin bronze, and the matched worm material is hardened with 45 steel to HRC4555, or 40Cr hardened HRC5055, and then ground to a roughness of Ra0.8μm by a worm grinder. The reducer wears very slowly during normal operation, and some reducers can be used for more than 10 years. If the wear rate is fast, it is necessary to consider whether the selection is correct, whether it is overloaded, and the material of the worm gear, assembly quality or use environment.
3. Gear wear
It usually occurs on the reducer installed vertically, mainly related to the amount of lubricating oil added and the oil variety. When installed vertically, it is easy to cause insufficient lubricating oil. When the reducer stops running, the transmission gear oil between the motor and the reducer is lost, and the gears cannot get the proper lubrication protection. When the reducer is started, the gears are not effectively lubricated, causing mechanical wear and even damage.
4. Worm bearing damage
When a failure occurs, even if the gearbox is well sealed, it is often found that the gear oil in the reducer is emulsified, and the bearings are rusted, corroded and damaged. This is because the condensate produced by the gear oil temperature rises and cools down after a period of operation of the reducer is mixed with water. Of course, it is also closely related to bearing quality and assembly process.
Offshore Wind Vessel Gearbox Market 2027: Crane and Winch Drive Demand
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?