hollowed areas
The rotary table of the hollow rotary platform is a hollow structure, and the servo motor is connected on the side to facilitate the installation of gas pipe and wire in the smelting tool.
High repeat positioning accuracy
The hollow rotating platform adopts the single-stage helical gear deceleration mode to increase the output torque, and the gear accuracy grade is below grade 5. In addition, the flexible clearance adjustment mechanism controls the side clearance by changing the center distance of the two gears, so that the empty return of the hollow rotating platform is minimal and the repeated positioning accuracy is below 5 arc seconds.
High rigidity
The rotary table of the hollow rotary platform is supported by a set of precision cross roller bearings. The rollers in the bearing are staggered at 90 degrees, and the roller diameter is slightly larger than the raceway size between the inner and outer rings of the bearing, so that there is a preload between the inner and outer rings of the cross roller bearing and the rollers. Therefore, the rotary table of the servo rotary platform supported by the bearing can bear various moments such as radial, axial and overturning, Its rigidity is more than 10 times that of traditional bearings.
High rotation accuracy
After the servo rotary platform is assembled, take the cross roller bearing of the platform as the rotation center, and grind the outer diameter and end face of the rotary table again (the standard level is finish turning) to ensure the geometric tolerances such as coaxiality and parallelism of the rotary table.
Any configuration of motor
The hollow rotating platform can flexibly change the size of the interface by customizing the flange and input shaft hole, which is suitable for connecting any brand of servo motor.
Offshore Wind Vessel Gearbox Market 2027: Crane and Winch Drive Demand
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?