Author: Site Editor Publish Time: 13-09-2021 Origin: Site
1) High bearing capacity. The gear is carburized, Quenched and ground, and the bearing capacity is greatly improved compared with the gear reducer with soft tooth surface and medium hard tooth surface of hardened and tempered hobbing.
2) Small size and light weight. Compared with the reducer with soft tooth surface and medium hard tooth surface, the reducer with the same bearing capacity can be reduced by 2-4 equivalent frame numbers.
3) Low noise and vibration. The accuracy grade is improved by gear grinding, and the gear is trimmed. The comprehensive efficiency of each gear is 0.98, and the vibration and noise are reduced.
4) Adopt multi-stage number to reduce single-stage speed ratio. The center distance can be opened to reduce the overall height of the reducer and meet the requirements of various mechanisms of the crane; The nominal transmission ratio of reducer reaches 400, which meets the requirements of slow crane.
Generally speaking, the gears of high-power gear reducers are forged from materials with high hardness, such as 45 steel. After carburizing and quenching process, the hardness reaches more than 350hbs. Gear reducers with hardness above this are called hard tooth surface gear reducers. The hardness of hard tooth surface gear reducer is not only high, but also the hardness of its output shaft and input shaft is much higher than that of ordinary gear reducer. Because of its high power, the material of its box body is also forged with cast iron, which can well cope with the vibration and impact force generated under high load. Longer service life, suitable for high load instruments. Due to the of materials and industry, the price of hardened gear reducer is relatively higher.
Offshore Wind Vessel Gearbox Market 2027: Crane and Winch Drive Demand
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?